Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Search the maintenance guides for answers to 99.999% of Omega questions

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Mutha Jugs n Speed

Pages: [1] 2 3 4 5 6 7 8 ... 31
1
Know how you feel, I'm heading that way also, possibly this is the last year that I'll be mucking around with my three Omegas. The coming April VED hikes are the only thing that's  holding me back at the moment....but have already cancelled the tax on one car and the second one is imminent, as common sense is starting to kick in much to the relief of SWMBO. ::)

2
Omega General Help / Re: Oil cooler cleaning etc.
« on: 03 January 2025, 21:48:38 »
Thanks DG, simples. :y

3
Omega General Help / Oil cooler cleaning etc.
« on: 03 January 2025, 14:33:18 »
 Just a quickie... I've just acquired a couple of very good oil coolers, one stainless and the other the older type, and looking at them they are in really good condition. Both  having come from well cared for low mileage cars, and although they look pretty clean, I was thinking could they be cleaned a little more before being put in the spares shed....any tips would be greatly appreciated. TIA :)

4
Omega General Help / 2.5 and 3.0 head gasket sets.
« on: 05 December 2024, 15:11:29 »
Is there any difference between the 2.5 and the 3.0 head gaskets sets? :-\

5
Omega General Help / Re: Spin off filter kit foR the V6
« on: 30 November 2024, 17:22:47 »
QED MotorSports.....great service, ordered at 14.30 yesterday and arrived at 09 15 this morning :y

6
Omega General Help / Re: Spin off filter kit foR the V6
« on: 30 November 2024, 06:44:46 »
I've taken Nick W's advice, and ordered one from QED. :y

7
Omega General Help / Re: Spin off filter kit foR the V6
« on: 29 November 2024, 12:56:46 »
Thanks.. like you say if it ain't broke, don't fix it....it's broke!! ;) 

8
Omega General Help / Re: Spin off filter kit foR the V6
« on: 29 November 2024, 12:02:33 »
I'm guessing that these are OK for the 3.0 litre?

9
Omega General Help / Spin off filter kit foR the V6
« on: 29 November 2024, 11:01:32 »
As title.....are these kits still available, and where I might find them TIA

10
Omega General Help / Re: 3.0 oil filler neck....removing.
« on: 05 November 2024, 21:22:50 »
That engine was built around 20k ago by Daz, loadsa time and money went into it, but Daz never did build sheets etc so must presume the oil cooler was sound at the time of the work being done. Luckily if that was a worse case scenario, Rock Autos still keep them for the Catera at £300 a pop. But further investigation will find out what's really needed. Strangely enough, I had planned to park this car and one of the 3.2's up for the next six months, as there's not much point in taxing them for the winter, that's nearly £800 that pig face won't be able to give away :y

11
Omega General Help / Re: 3.0 oil filler neck....removing.
« on: 05 November 2024, 19:23:36 »
Ooer! didn't think about the oil cooler. This 3.0 is an early facelift circa 2000, did they fit the oil cooler upgrade to stainless?

12
Omega General Help / Re: 3.0 oil filler neck....removing.
« on: 05 November 2024, 18:31:02 »
The 3.2's have both been done yonks ago, but on the 3.0, I'm getting a few seconds of misfire on a cold start up, plus a couple of minutes of white smoke which is slow to dissipate plus a small amount of mayo in the filler neck. But just having just done a 500 mile round trip without issues, other than the coolant changing in colour to a sludgy brownish colour, also oil checks out clean,I'm thinking possibly head gasket??  :-\

13
Omega General Help / Re: 3.0 oil filler neck....removing.
« on: 05 November 2024, 13:04:27 »
Thanks...will take a closer look. :y

14
Omega General Help / 3.0 oil filler neck....removing.
« on: 05 November 2024, 09:47:19 »
Can I remove the long part of the oil filler neck as on the 3.2's. Just had a quick go at seeing if it comes off, but being a bit on the cack handed side I didn't want break it if the 3.0 is different.....twist and tug,  just tug or leave it alone? :-\ tia.

15
Omega General Help / Re: Intermittent spanner light.
« on: 22 September 2024, 08:42:54 »
Sounds good.....under floor heating and A/C,  big screen TV, recliner, coffee and tea making, mini bar...not sure if there's anything missing  OK,  a minion or two to work on the cars, and then it's just another day in Paradise :)

Pages: [1] 2 3 4 5 6 7 8 ... 31

Page created in 0.011 seconds with 14 queries.