Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[biggriffin]

Hard wired camera into the Insignia,  Couldn't find a ignition live in the roof,, so used a piggyback fuse in the fusebox, not ideal but it works...

Then tried to set memory seats, can't do that, and am struggling with the "Infotainment" system, phone working, radio works, so that'll do 

[Rangie]

Had a new air suspension compressor fitted to the Range Rover..

[biggriffin]

Note to self, stop looking on tInternet shopping sites,, just bought a pair of rear  B4 Bilstein for £60.

[countrywoman]

Ordered a used squib of the bay and a horn button to fit the steering wheel on the Austin.

[Marks DTM Calib]

Note to self, stop looking on tInternet shopping sites,, just bought a pair of rear  B4 Bilstein for £60.

Bilstein have a bit of a sale on at the moment, some good deals to be had

[biggriffin]

Note to self, stop looking on tInternet shopping sites,, just bought a pair of rear  B4 Bilstein for £60.

Bilstein have a bit of a sale on at the moment, some good deals to be had

 I did post up a clinky for the sale,, but these came from an independent,, cheaper than from Bilstein even with 40% off.

[BazaJT]

Not today but yesterday,put a new strut top mount and new wheel bearing  on o/s front of eldest grandaughters MkIV Golf. N/s side to do when time allows.

[biggriffin]

Bilsteins fitted to the Insignia 

[Field Marshal Dr. Opti]

Bilsteins fitted to the Insignia 

Better?

[biggriffin]

Bilsteins fitted to the Insignia 

Better?

.

There's a definite improvement, her big arse doesn't wobble as much now,  that may have been wobbling due to having two different units on the back, 1 original and one a munro,,, just keep my eyes open for a pair of fronts at good price.

[Rangie]

Cleaned the RRS checked fluids etc, off to collect the "tin tent" tomorrow for a few days away in Sussex.

[countrywoman]

Fitted the squib to the Austin, found a plug in the box off old Omega wiring but it had one to many terminals to plug in the back. Bit of snipage and it fitted. Next problem was the wheel adaptor had to be machined down to fit the centre turning bit,40 grit flap disc in the angle grinder works! Waiting for a horn push to finish the job.

[TheBoy]

Changed the oil in hers, purposely only to halfway up the dipstick to test a theory about a potential fault....

[Doctor Gollum]

It's a Jaaaag, there's nothing potential about it

[TheBoy]

It's a Jaaaag, there's nothing potential about it

I think it could be a schoolboy error on my part, so I may have to apologise for all the words I said about that Callum town.