Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: polilara on 27 March 2024, 17:19:26

Title: Y26SE Cam Cover Seals in one or two Pieces
Post by: polilara on 27 March 2024, 17:19:26

Just opening the package of Victor Reinz 15-34268-02 to install cam cover seals. Is it really so that there are two separate seals for one cover. I remember when I removed the old one four weeks ago that it was in one piece, there was some kind of 'Bridge' that joint these two seals together in both ends, so are these OK??

Title: Re: Y26SE Cam Cover Seals in one or two Pieces
Post by: dave the builder on 27 March 2024, 17:29:06

Older ones where linked IIRC
I fitted these to my 2.6 no issues  ;)

(https://i.ebayimg.com/images/g/59oAAOSwBh9dQrkG/s-l1600.jpg)

clicky link  (https://www.ebay.co.uk/itm/193024939057)

Title: Re: Y26SE Cam Cover Seals in one or two Pieces
Post by: polilara on 27 March 2024, 17:32:20

OK, thanks, I used ELRING last time and they were linked acc to Autodoc picture, but if these are ok, I continue, thanks again.

Title: Re: Y26SE Cam Cover Seals in one or two Pieces
Post by: TheBoy on 27 March 2024, 18:22:14

From memory, I think it was the Elring ones that used to go hard very quickly, and leak prematurely...

Title: Re: Y26SE Cam Cover Seals in one or two Pieces
Post by: biggriffin on 27 March 2024, 21:26:18

Quote from: TheBoy on 27 March 2024, 18:22:14

From memory, I think it was the Elring ones that used to go hard very quickly, and leak prematurely...

 With the supply of certain parts becoming nls, beggars can't be chossers,, and if GM still have them,, gawd knows how much they will be.

.Rinz was oe supply

Title: Re: Y26SE Cam Cover Seals in one or two Pieces
Post by: polilara on 28 March 2024, 10:27:54

Good to know about Erling, in my case they failed as the mayonese in breather blocked the system in -20 degrees. Victor Reinz was recommended somewhere here in OOF.