Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Car Parts, bits For Sale & Wanted / prefacelift irmscher kit f/s

« on: 08 April 2015, 10:14:23 »

As per title. I have a prefacelift irmscher bodykit for sale.
The kit is in good condition and complete.
Front bumper is rattle can sprayed in 282. Could do with a respray. Does not have holes for headlight washers but has the hole marks on the back so can be drilled out if needed.
Side skirts (1 has a mount missing, has snapped off) with end caps also rattle can sprayed so could do with a respray.
Rear bumper in dark metallic green could do with a respray
Fog lights and brackets
This is a complete kit. Not fitted to car. This is a spare kit that i bought just incase something happened to the one fitted to my mv6 that i am sadly breaking.
Looking for around £350 complete collected from Swindon Wilts 
Will upload some pics when i get a chance over the weekend

2

Car Parts, bits For Sale & Wanted / mfl mv6 breaking

« on: 08 April 2015, 10:02:12 »

 Its with great sadness that i have to break my mfl 99 mv6 manual in polar sea blue 282. Just putting feelers out to gauge interest first. 

Parts that will be available are as follows

Black leather mv6 seats not in showroom condition but far from past it. £150 ono
Irmscher carbon interior trim (heater control surround and ashtray, door card strips, door handle covers and bit under handbrake) £70 ono
Mfl irmscher front bumper. Will need respaying as paint is cracking and flaking at the bottom. £150 with fogs or £100 without fogs
Irmscher front bumper fog lights and mounting brackets £50 ono
Facelift irmscher rear bumper not twin exhaust exit, paint flaking but no damage £100 ono
Side skirts not irmscher will need painting was told they were off a monaro but not 100% sure £30 ono
Irmscher rear spoiler not the lip spoiler £50 ono
Hid headlights with ballast packs £80 ono
Irmscher red lowering springs with shocks £150 ono
Limited slip diff. Not sure on ratio £150 ono
Manual gearbox £180 ono possibly all parts for manual conversion if needed £220 ono
Engine 3.0l 125k head gaskets and cambelt done 10k ago. Needs new rocker gaskets possibly rocker covers £150 ono
Resinator box for bagpipe removal including pipework and plenum £40 ono
Rear parcel shelf with blind and switch £35 ono
5X facelift mv6 alloys 2 with legal tires 3 without 4 of them painted black £140 ono

Everything else available aswell just ask me what you want and i will let you know a price.

Prices are not delivered. Parts available for collection from Swindon Wilts.
Car is still in 1 piece and can be seen running.

3

Car Parts, bits For Sale & Wanted / facelift vented rear brake setup for sale

« on: 12 March 2015, 18:01:42 »

As per title i have a set of rear calipers and discs for sale. Was going to upgrade the rears on my mfl mv6 but i am selling the car now so no longer needed. Discs are in good condition may have some surface rust. Calipers could do with a clean but work fine. Pads are present and have meat on them but are probably contaminated with brake fluid so best to change them. £60 collection swindon. Pm me or text or ring me on 07908 018373 text message preferred as i work nights. 

4

Car Parts, bits For Sale & Wanted / cdx wheels for sale

« on: 08 March 2015, 13:38:35 »

I have a set of 4 cdx wheels for sale. They came off a facelift 2001 car. Dont know if they are the right 1's for the car. They have legal budget tyres on 3 of them and a dunlop on the other. Looking for about £80 for the set. Or make me an offer. Collection from Swindon , Wiltshire.









If interested pm me or text me on 07908 018373. Thanks

5

Car Parts, bits For Sale & Wanted / wanted f/l rear blind switch

« on: 25 May 2014, 12:43:58 »

Hi guys. As per title. After the rear blind switch for a f/l. Been looking for ages if anyone can help would be much appreciated. Thanks 

6

Omega Electrical and Audio Help / mental tid

« on: 08 April 2014, 18:36:34 »

Hi guys. Just seem to be getting problem after problem now. My tid is going mental. Just keeps scrolling through all the options. Thought it might have been the switch so disconnected it and its still doing it. Was fine this morning on way to work now its just being stupid.   
Have a look for yourselves and hopefully somebody knows why its doing it. Video is a bit fast for some reason but you get the picture.

7

Omega Electrical and Audio Help / oil pressure light

« on: 06 April 2014, 17:50:58 »

Hi guys.
I have noticed that my oil pressure light is not coming on before I start the engine. I have tried a different bulb in it that I know works and its still not coming on. Any ideas? Could it be the pressure switch or maybe the wire has come off. Also anyone know where the switch is located or where the wire connects to it? Thanks

8

Car Parts, bits For Sale & Wanted / wanted fl mv6 alloy wheel

« on: 30 March 2014, 23:01:41 »

Hi guys. As per title. I am after what I think is a fl mv6 alloy wheel as one of mine has damage and the tire keeps going down   failing to source 1 I may just have it refurbished.

I am after 1 like this
 

9

Car Parts, bits For Sale & Wanted / wanted: pfl / mfl elite leather door card

« on: 29 March 2014, 21:33:44 »

Hi guys as per title for 99 saloon drivers door card. As I am going to have to destroy mine to gain access to the locking mechanism as door is deadlocked and central locking has failed on drivers door. Putting the key in the door is not working. 

10

Omega Electrical and Audio Help / drivers door dead locked

« on: 29 March 2014, 19:18:44 »

Hi guys. My drivers door is deadlocked and the central locking has just failed. Now I cant get in the door. Anyone know how to get the door open? I got a feeling that I am going to have to destroy my door card to get access to the locking mechanism. Any ideas most welcome.

11

Car Parts, bits For Sale & Wanted / Wanted: Pas pump for 3.0

« on: 24 February 2014, 12:45:11 »

Hi guys. As per title I am after a pas pump for my 3.0 mv6 on 99 plate. Need one from a 3.0 as been informed that the later 3.2 will fit but need to change pipework aswell. I am after one that someone will post to me as collection is gonna be difficult with no pas. Cheers guys 

12

Omega General Help / power steering stopped working

« on: 23 February 2014, 02:26:01 »

My power steering packed up earlier. Car was on full lock in middle of three point turn and it packed up. Thought the steering had locked as I couldnt turn the wheel. Upon closer inspection the pump was making a whurring noise which stopped after about 2 mins. Belt is fine. Pulley on pump is still turning fluid in reservoir but no power steering. I am assuming the pump has packed up. But could it be the steering box gone. I only think its the pump because of the noise it was making. Hope someone can help with this. Has this happened to anyone else. 

13

Omega General Help / conrods

« on: 14 February 2014, 23:26:06 »

Hi does anyone know if the conrods on a 3.0 v6 are the same as those from a 3.2 v6
or does anyone know the specs of the two different types

Cheers guys

14

Omega General Help / sudden misfire 3.0 mv6 1999 model

« on: 23 October 2013, 03:27:51 »

Hi guys just wanted a bit of info for the weekend on where to start with a misfire. I was driving home from work about an hour ago and car was running fine. Came off a roundabout and the tc kicked in and now I have a misfire. I dont understand what could have caused this. No lights on on the dash, I have tried turning the car off and back on and its still doing it. Could it be something simple or a major job like head gasket. I hope its just something silly like spark plugs or coil pack. Any suggestions greatly appreciated. 
Cheers and hope someone can help.

15

Omega Electrical and Audio Help / ccr 2006 wont take code

« on: 26 June 2013, 19:40:50 »

Hi guys got a ccr 2006 from ebay. It was working with the code supplied with it. Car has been sat for six months with no battery on it. Tried to put the code in today and it wont take it just keeps counting down on attempts left. Any ideas?