Description | Nm | Notes |
Adapter, fuel distributor pipe to intake bridge | 8 |
Adapter, fuel distributor pipe to fuel distributor pipe | 15 |
Starter to cylinder block | 40 |
Intake bridge to intake flange | 20 |
Intake flange to cylinder head | 20 |
Drive disc/flywheel to crankshaft | 65 + 30° + 15° | 1,2 |
Exhaust manifold to cylinder head | 20 | 3 |
Oil filter housing cover to oil filter housing | 25 |
Heat exchanger cover to heat exchanger | 30 |
Heat exchanger cover to cylinder block | 20 |
DIS ignition module to member | 8 |
Torsional vibration damper to toothed belt drive gear | 20 |
Throttle body to intake plenum | 8 |
Pressure line to power steering pump | 28 |
Accelerator pedal module to bulkhead | 20 |
Link rod to stabiliser | 65 | 3 |
Alternator to cylinder block and oil pump | 35 |
Transmission to cylinder block (M8) | 20 |
Transmission to cylinder block (M12) | 60 |
Transmission holder to underbody | 45 | 4 |
Threaded sleeves to crankshaft bearing bridge | 8 |
Base plate, toothed belt tension roller and toothed belt guide roller to cylinder head | 40 |
Auxiliary aggregate(s) support to cylinder block | 35 |
Idler bracket to body | 55 + 75° + 15° | 1 |
Rear toothed belt cover to cylinder head and oil pump (M6) | 8 |
Rear toothed belt cover to cylinder head and oil pump (M8) | 10 |
Crankshaft pulse pick-up in cylinder block | 8 |
Crankshaft pulse pick-up disc to crankshaft | 15 | 1 |
Refrigerant lines to compressor | 40 |
Ribbed V-belt pulley to coolant pump | 8 + 30° + 30° | 1 or 12Nm+loctite |
Ribbed V-belt pulley to power steering pump | 20 + 30° + 15° | 3 or 20Nm+loctite |
Ribbed v-belt tension roller to cylinder head | 35 |
Knock sensor to cylinder block | 20 |
Fuel lines to adapter, fuel distributor pipe | 15 |
Fuel distributor pipe to intake bridge | 8 |
Coolant bridge to cylinder head | 30 | 5 |
Coolant intake pipe to exhaust manifold | 8 |
Coolant intake pipe to cylinder block | 20 |
Coolant pump to cylinder block | 25 |
Coolant pipe and engine transport shackle to cylinder head | 25 |
Ball joint to steering knuckle | 100 | 3 |
Crankshaft bearing bridge to cylinder block | 20 |
Crankshaft bearing cap and crankshaft bearing bridge to cylinder block | 50 + 60° + 15° | 1 |
Oxygen sensor in front exhaust pipe | 30 | 6 |
Steering arm to steering shaft | 160 | 3 |
Solenoid valve for intake plenum switchover valve to switchover valve | 8 |
Secondary air metal pipe to exhaust manifold | 20 |
Engine damping block to engine bracket | 40 |
Engine vent housing to cylinder block | 8 |
Engine damping block to front axle body | 55 |
Engine bracket to cylinder block | 40 |
Engine bracket, engine damping block to cylinder block | 60 |
Camshaft bearing caps to cylinder head | 8 |
Camshaft sprocket to camshaft | 50 + 60° + 15° | 1 |
Camshaft sensor to camshaft bearing cap | 8 |