Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Malcolm_D on 26 November 2018, 10:58:16

Title: Ncdc2013 screen
Post by: Malcolm_D on 26 November 2018, 10:58:16

02 2.6 Elite. I think that it is NCDC2013!
Display is dying, lots of flashing, stripes etc. Have had it out and when I press the bottom left of the screen it is ok, loose connection? I cannot get it apart without unsoldering three spring earth clips? Is trying to source a replacement screen the best way forward?
These units are a pain! CD player stopped reading discs, now the disc cartridge will not eject, sat nav has packed in so no way to play a CD, I have put in a 3mm jack to connect an iPod. Now the display!!

Title: Re: Ncdc2013 screen
Post by: amba on 26 November 2018, 15:24:21

Screen and head unit are coded together so its not just a case of buying another screen.

You will need the code for your defective screen along with the code for the replacement

Title: Re: Ncdc2013 screen
Post by: amba on 26 November 2018, 15:25:20

Much cleverer people than me will advise you the best method but that is the basis

Title: Re: Ncdc2013 screen
Post by: VXL V6 on 26 November 2018, 19:24:29

Needs a new panel if you wish to repair it, the part number is something like Sharp LQ126....... That way you don't need to worry about coding.

I can have a look for the correct part number if you decide to go that route. You will need some basic soldering skills to remove the old one and fit the new.

Title: Re: Ncdc2013 screen
Post by: VXL V6 on 26 November 2018, 19:46:22

http://www.omegaowners.com/forum/index.ph