Omega Help Area > Omega General Help

Front Tires Wear inside Area

<< < (6/6)

9jdm:
Just caught sight of your problem. I had inner tyre wear on mine and no amount of so called four wheel tracking would sort it. There is some good stuff on the forum about camber adjustment by slackening off the strut bolts. There are two and one goes through an elongated slot. I pulled the top of the wheel out as far as I could( the adjustment is small but makes a difference) to give the wheel a more upright stance and hence take load off the inner side. I then had the normal geom check at a good tyre specialist. Three years later still no uneven wear.
There are some good knowledgeable guys on here so I am sure someone will comment.

polilara:
Yes, I already got good tips here how to proceed. During next front shocks change I renew almost everything in front including wishbones, springs etc + bearings as well and get the 4-wheel adjustment done by a professional keeping in mind what Kevin Wood recommended.

Navigation

[0] Message Index

[*] Previous page