Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Andyv6]

98 mfl elite 3.0l climate control not controlling correctly if it is set at lo great blows cold set at high blows nice and hot set it any where else and it has a mind of its own set it let's say 22 it gets to around that figure then starts blowing cold again, try upping it a few degrees and still the same(cold) but if you put it back at hi will get hot again any ideas ?
I've had a quick look at the rods on the actuators and they all seem to be ok.

[Andy H]

Is your outside temperature sensor reading correctly?

The facelift cars use the outside temperature to screw up modify the inside temperature. If the outside sensor isn't working correctly then the inside temperature becomes high or low with no control in between.

I don't know if the MFL had this 'feature'

[Doctor Gollum]

Is your outside temperature sensor reading correctly?

The facelift cars use the outside temperature to screw up modify the inside temperature. If the outside sensor isn't working correctly then the inside temperature becomes high or low with no control in between.

I don't know if the MFL had this 'feature'

The Elite (and any optioned accordingly) would with climate control fitted

[Andy B]

Is your outside temperature sensor reading correctly?

The facelift cars use the outside temperature to screw up modify the inside temperature. If the outside sensor isn't working correctly then the inside temperature becomes high or low with no control in between.

I don't know if the MFL had this 'feature'

The Elite (and any optioned accordingly) would with climate control fitted

using the outside air temp sensor to help control the interior temp is only applicable to face lift .... MFL didn't

[Andyv6]

Outside temp sensor reading fine guys.

[Doctor Gollum]

Outside temp sensor reading fine guys.

Climate panel needs resetting.

Please read the manual and report back

[TheBoy]

Or the fan in the climate panel has died.

[Andyv6]

Carried out the reset and up to yet all seems to be working well 
Thanks all.