Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Figureman52 on 29 April 2021, 14:24:21

Title: Temp Gauge
Post by: Figureman52 on 29 April 2021, 14:24:21

Is there any way to check the connection of the spade connector on the sender for the temp gauge without removing the plenum etc?

It may or not be relevant, but I had the cam cover gaskets replaced last November but due to lack of use have only just noticed the gauge isn’t working. :-[

What else might cause the gauge to stop working?

Thanks.

Title: Re: Temp Gauge
Post by: Migv6 le Frog Fan on 29 April 2021, 15:05:43

Might be able to see with a mirror on a stick. It only takes a few minutes to take the plenum off though.