Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Lazydocker]

Shame long time no see...

Yeah... On call as one of the guys is off and I still haven't replaced the East Sussex bloke, although I have just advertised

Little Izzy was looking forward to her first meet too

[The Red Baron]

shame paul, would have been nice to have seen the little un. 

[Terbs]

Brian36....can't help with bumper....but I think I have a spare set of calipers here, came off my 2.6 and as far as I know are in working condition. Only replaced as trying to find why car swerved which turned out to be wishbone bushes and idler.
Have not got bleed gear though.

[grain.ben]

I don't have a rivet gun to do rear window mech, sorry

I have one tb 

Do you have the correct rivets?, Only as it looks like I may end up letting you down on the mirror but I know I have the rivets as I bought a bag only last week.

Thats ok ill source another from somewhere. As apposed to the rivet gun, i bought a cheap (ish) one and the largest rivet size is 4.5mm, i have no idea if this is the correct size for the window mech. 

[brian36]

Brian36....can't help with bumper....but I think I have a spare set of calipers here, came off my 2.6 and as far as I know are in working condition. Only replaced as trying to find why car swerved which turned out to be wishbone bushes and idler.
Have not got bleed gear though.

thanks for that try catch up tomorrow if can see if i can get help etc 

[the alarming man]

Table booked for 19:30

[Terbs]

Thanks Mark....we will be there about 19.00hrs

[unlucky alf]

I don't have a rivet gun to do rear window mech, sorry

I have one tb 

Do you have the correct rivets?, Only as it looks like I may end up letting you down on the mirror but I know I have the rivets as I bought a bag only last week.

Thats ok ill source another from somewhere. As apposed to the rivet gun, i bought a cheap (ish) one and the largest rivet size is 4.5mm, i have no idea if this is the correct size for the window mech. 

Well they will be in the back of my car anyway if you need them (inc the gun itself as the rivet shafts are a bit larger), The rivets I've got are  4.8 x14mm which seemed to be the correct size for the window mech as I fitted one earlier in the week.

[grain.ben]

I don't have a rivet gun to do rear window mech, sorry

I have one tb 

Do you have the correct rivets?, Only as it looks like I may end up letting you down on the mirror but I know I have the rivets as I bought a bag only last week.

Thats ok ill source another from somewhere. As apposed to the rivet gun, i bought a cheap (ish) one and the largest rivet size is 4.5mm, i have no idea if this is the correct size for the window mech. 

Well they will be in the back of my car anyway if you need them (inc the gun itself as the rivet shafts are a bit larger), The rivets I've got are  4.8 x14mm which seemed to be the correct size for the window mech as I fitted one earlier in the week.

Nice one, cheers, we shall have a look at it tomorrow 

[ffcgary1]

Sorry all, due to impending rented garage clear out, i will not be able to make tomorrow, gutted!!! and the car was cleaned and polished as well
Hope you all have A GREAT day and will hope to get to the next one.
Gary.

[Rog]

Not sure 

I should be living in West Wales by then. A bit of a long way 

Probably need to get back to London about then, might just be able to detour via High Wycombe, only might though.   

Beginning to look very unlikely for me    All sorts of things going on with the house in Wales. Tree surgeons, fence putter-uppers, builders etc etc. Not to mention a 90 year old Mum that needs looking after, and the fact that the house is still full of unpacked boxes 

SWMBO won't thank me for disappearing early to meet up with a load of strange people  from t'internet.

Looking possible, but VERY last minute. I really would like to get there, but not sure why     

[05omegav6]

Have a job to do on the way, but should be along later

[biggriffin]

Working upside double time.,   so wont be able to attend,what sounds like s well attended meet

[Lazydocker]

Have a good day guys. Gutted we can't be there

[RobseyMV6]

Not going to make it, sorry but enjoy!!