Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jay w]

not mine, my friend with a P reg vectra CDX, i would imagine it is the same set up as a similar model Omega.

He has the radio code but not the multichanger one, i know it is a dealer thing but aside form the reg docs do they need anthing off the multichanger?

if so how the hell do you get it out of the glovebox???

[VXL V6]

To get the autochanger out of the glovebox on a Vectra you need to remove the glove box - Two screws on the underside (top of the footwell if you see what I mean) and two at the top of the glovebox with the lid opened then gently pull the whole box forwards, BE VERY CAREFUL OF THE AUTOCHANGER CABLE on the r/h side as you remove the glovebox

Once out (The trafficmaster will probably fall out as well because it's aerial is taped to the top of the box) there is a screw either side to release the autochanger and the cable needs to be gently unplugged.

Finally you can get the unit out to read the serial number!!!!

A number of outlets are able to get the codes from Blaupunkt but if you're struggling i'll dig out the number of a dealer I know.

[Entwood]

not sure if this site will help .. did with my radio code .. not sure about multichangers ...

http://www.31bubblegum.proboards54.com/index.cgi?board=here

[Jay w]

cheers  

[TheBoy]

Just the V5 needed for the carpass...

[Jay w]

got the glovebox out today took a fair time as we didnt want to damage everything.........

got the serial number, putting it all back together and noticed a leather binder under the passenger seat, looked inside and found all the instructions and the car pass

i slapped him soooo hard

[markey mark]