Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ricardo1500]

Hi all
Yesterday my wipers suddenly decided to park in the wrong place



They sweep as normal and return to the bottom of the screen but then go up a bit as in the photo before stopping.  They both seem to be tight as normal, I could understand one coming loose but not both at the same time....any one got any ideas please

[ricardo1500]

Bu**er wrong photo ...try this it makes more sense

[Andy B]

I'm at work so can't see your photo. Sounds like the drive has become loose between the motor and the arm that drives the mecanism as a whole. If you remove the whole wiper mechanism from the car, you'll see a small plate/arm bolted to the motor via a taper shaft. It's this nut that's come loose. You'll also see 2 V's that need lining up with each other like : ><

[ricardo1500]

Thanks Andy...will work on what you,ve said and see whats what

[ricardo1500]

Andy you were spot on....the nut on the motor was loose,  OOF strikes again  

[Andy B]

Andy you were spot on....the nut on the motor was loose,  OOF strikes again  

Good. Glad you're sorted. The cost free fixes are always the best! My wife had the same problem years ago in my Senator when it started piddling down as she was on her way home. They just stopped though in the middle of the screen.