Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: asi_ on 12 October 2013, 21:05:52
-
As above, i need NCDR1100 - CID - CDCI3. i use it for Omega Prefacelift
i am from istanbul/turkey.
-
NCDR 1100 were never fitted to Omega's, believe they were from the Vectra and Astra family, so doubt many will have a set up on this site, you never know though.
The other thing I not sure about is whether they were Can Bus, if so then your probably going to have issues getting the Computer Info bit working, if not Can Bus then should work, but your probably still need to change the Engine Info in the configuration. :-\
-
I know at least one member running this in an omega, so definately doable :y
-
NCDR1100 / 1500 installation into a prefacelift is little more than installing a NCDC2011 / 2013 / 2015 into a facelift that previously didn't have one. Over and above you just have to decide where the CDC is going to reside and route the cabling to it.
-
There is no problem mates :) if i found that parts it would be good.
-
There is no problem mates :) if i found that parts it would be good.
The problem you have is NCDR1100 was never a standard fit here, we did have the CID's but they came with NCDC2013 or 2015.
You will probably have more luck on Astra/Vectra forums :y
-
take a look here :y
http://www.omegaowners.com/forum/index.php?topic=118567.0
-
//TB strokes chin and wonders if he should sell this...
(http://i14.photobucket.com/albums/a319/IamTheBoy/null_zps7ee2ea6a.jpg) (http://s14.photobucket.com/user/IamTheBoy/media/null_zps7ee2ea6a.jpg.html)
and the CDC3 and loom to convert CCR600/800 to NCDR/CID
(http://i14.photobucket.com/albums/a319/IamTheBoy/null_zpsbb29ba6f.jpg) (http://s14.photobucket.com/user/IamTheBoy/media/null_zpsbb29ba6f.jpg.html)
No idea what its worth though.
-
What's the circuit board on the right of the units with the Cat5 by it?
-
What's the circuit board on the right of the units with the Cat5 by it?
Ah, remember the birds nest programmer? MkII ;)