Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: marcbcfc on 10 October 2006, 15:48:44

Title: 2.5 v6 fault codes
Post by: marcbcfc on 10 October 2006, 15:48:44

Hi Gents

can anyone tell me or explain please what the following fault codes mean:

135 'check engine' lamp (fault code lamp) low voltage ?{ IS THIS RELATED
TO
37 engine self diagnosis (fault code light) low voltage { BTTY POWER

57 iscv -interuption
{does this mean its knackerd or needs cleaning
35 iscv- poor or no idle

13 oxy sensor no change in voltage/open circuit--Knackered?
any thoughts guys
 many thanks
 :'(

Title: Re: 2.5 v6 fault codes
Post by: Marks DTM Calib on 10 October 2006, 16:05:38

Did you get the fault codes out of my work in progress FAQ?

How did you read the codes, through the check lamp or a code reader.....because 135 and 37 are classic 'ECU bulb missing' symptoms.

57 and 35 sound like a bad connection.....

13 might well dissappear........i the above are sorted.

Any other symptoms?

Title: Re: 2.5 v6 fault codes
Post by: marcbcfc on 10 October 2006, 16:25:12

I used the safety clip method when you say the bulbs missing whereabouts because my eml lights up fine or am i missing the point

other symptons from the car are its not idling too clever and it makes a ticking noise all the time which is probably the tappets which i will sort later But also the rubber pipe on the secondary front pipe dvrs side has melted a couple of times so ive been told exhaust may be blocked or non return valve knackerd

i was thinking the cat maybe on its way out  any ideas

all help appreicated thanks