Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1] 2  All   Go Down

Author Topic: How do I remove this bastard?  (Read 2389 times)

0 Members and 1 Guest are viewing this topic.

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
How do I remove this bastard?
« on: 09 January 2021, 15:22:37 »

I thought it would simply pull out. :(

A couple of wires look like they need replacing. :(



Logged

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #1 on: 09 January 2021, 15:23:52 »

Are those wires something to do with the fuel gauge/fuel level?
Logged

Sir Tigger KC

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • West Dorset
  • Posts: 23480
    • 2 Fords
    • View Profile
Re: How do I remove this bastard?
« Reply #2 on: 09 January 2021, 15:46:24 »

Reconnect the battery and touch them together to see if there is current!  :y
Logged
RIP Paul 'Luvvie' Lovejoy

Politically homeless ......

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #3 on: 09 January 2021, 15:51:47 »

I've pressed and released the two large plastic clips on the side of the basket but no......
Logged

Nick W

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Chatham, Kent
  • Posts: 10856
  • Rover Metro 1.8VVC
    • 3.0l Elite estate
    • View Profile
Re: How do I remove this bastard?
« Reply #4 on: 09 January 2021, 16:19:36 »

As that's the swirl pot the pump sits in, why do you need to remove it? Fit a new pump to its bracket and reassemble everything.
Insulating the damage to those wires would be sensible
Logged

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7780
    • omega b2 2.6 cdxi
    • View Profile
Re: How do I remove this bastard?
« Reply #5 on: 09 January 2021, 16:19:58 »

towards the end of this video
clicky
yes those wires look well chewed
has someone or something been there before  ::)
Logged

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #6 on: 09 January 2021, 16:53:53 »

towards the end of this video
clicky
yes those wires look well chewed
has someone or something been there before  ::)

Yes.....I watched this but it didn't show how the basket was removed. Mine seems stuck solid. I want to get it out because it will make it easier to fix the wires.
Logged

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7780
    • omega b2 2.6 cdxi
    • View Profile
Re: How do I remove this bastard?
« Reply #7 on: 09 January 2021, 16:58:32 »

clips look like they go out, not push in if you look at the video
also look at images of the swirl pot and pump on the google  ;)
it's different to the astra ones i have done, they are not attached like that
Logged

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #8 on: 09 January 2021, 17:06:58 »

clips look like they go out, not push in if you look at the video
also look at images of the swirl pot and pump on the google  ;)
it's different to the astra ones i have done, they are not attached like that


I've tried pushing clips in.....pulling clips out......pushing down......pushing down and twisting in both directions... yanking with a combination  of brute force and ignorance.

My guess is that some f*ucker has used Araldite. ;D
Logged

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #9 on: 09 January 2021, 17:12:37 »

I've extracted the pump (looks and sounds like a clit stimulator sex toy) from the plastic casing, so may just buy this if it works out cheaper.

Anyone know the function of the shagged wires?
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28202
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: How do I remove this bastard?
« Reply #10 on: 09 January 2021, 17:18:58 »

Gauge sender ;)
Logged
Onanists always think outside the box.

Field Marshal Dr. Opti

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Utopia
  • Posts: 31617
  • Speaking sense, not Woke PC crap
    • View Profile
Re: How do I remove this bastard?
« Reply #11 on: 09 January 2021, 17:21:28 »

Gauge sender ;)

Thanks......not essential for the pump to work then. Do I have that right?

If it is just for there for the fuel gauge to work in the car I may not bother pissing about.
« Last Edit: 09 January 2021, 17:23:18 by Field Marshal Dr. Opti »
Logged

dave the builder

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Derbyshire
  • Posts: 7780
    • omega b2 2.6 cdxi
    • View Profile
Re: How do I remove this bastard?
« Reply #12 on: 09 January 2021, 17:23:13 »

I've extracted the pump (looks and sounds like a clit stimulator sex toy) from the plastic casing, so may just buy this if it works out cheaper.
if you haven't yet broke anything or do so when you put it all back together  :)

Anyone know the function of the shagged wires?
usually all 4 wires go to the multi plug
pump live, pump neutral
level sender neutral or live and sender signal

looks like someone has replaced the sender ,was the damaged wiring trapped by the locking ring ? not going into the multiplug
Logged

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28202
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: How do I remove this bastard?
« Reply #13 on: 09 January 2021, 17:23:40 »

Gauge sender ;)

Thanks......not essential for the pump to work then. Do I have that right?
Technically correct, but having them exposed in the tank is, er, unwise. As is the gauge not working.  ;)
Logged
Onanists always think outside the box.

Doctor Gollum

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • In a colds and darks puddleses
  • Posts: 28202
  • If you can't eat them, join them...
    • Feetses.
    • View Profile
Re: How do I remove this bastard?
« Reply #14 on: 09 January 2021, 17:25:07 »

I've extracted the pump (looks and sounds like a clit stimulator sex toy) from the plastic casing, so may just buy this if it works out cheaper.
if you haven't yet broke anything or do so when you put it all back together  :)

Anyone know the function of the shagged wires?
usually all 4 wires go to the multi plug
pump live, pump neutral
level sender neutral or live and sender signal

looks like someone has replaced the sender ,was the damaged wiring trapped by the locking ring ? not going into the multiplug
The sender plugs into the underside of the cap and exots out of thee top in the flat black connector  ;)
Logged
Onanists always think outside the box.
Pages: [1] 2  All   Go Up
 

Page created in 0.019 seconds with 18 queries.