Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Big_Al on 12 November 2012, 17:37:37
-
hi guys ,
not exactly gonna break the bank with these 2 bits but hoping someone may be able to help to get the new MV looking good :-[ :-[ :-[
If anyone has an old knackerd CCR 2006 head unit laying about ,I need the front /rear fade/Balance control button . There are 3 little buttons together on the left hand side the missing one is as above & the other 2 are the Bass &Treble adjustment.
I pulled 3 out of an old 2005 set at the breakers yesterday but these do not fit . The control shaft has a half moon cut out for the knob to push onto .
Second small part is a black plenum blanking plug . . . . only 1 missing
If anyone can help could you PM me please . . . willing to pay within reason & of course postage . :y :y Al
-
I might have the control knob thing from the 2006. I'll check in the morning and let you know :y
-
front /rear fade/
If they`re the same as the NCDCxxxx got `em here.
black plenum blanking plug
Plenty here.
-
black plenum blanking plug
Plenty here.
Could you keep me a couple please Rob? For when I get it running again :D
A list is forming ....... ::)
Cheers :y
-
black plenum blanking plug
Plenty here.
Could you keep me a couple please Rob? For when I get it running again :D
A list is forming ....... ::)
Cheers :y
Sure :y
-
front /rear fade/
If they`re the same as the NCDCxxxx got `em here.
black plenum blanking plug
Plenty here.
don't know about NCDC ones Rob . . but they are not the same on the 2005 . . they look the same but the internal spline for the "pot" shaft is different .
Johnny says he may have 1 from a 2006 , he gonna check tomorra. :y :y
-
I definitely have one Al. Is one all you need?
Do you want me to take photos, etc to make sure?
-
I definitely have one Al. Is one all you need?
Do you want me to take photos, etc to make sure?
hi johnny ,
splendid .yes only need one & presume they are all the same . shaft of the pot is a half moon shape .
A photo of the unit with the knob pulled off showing the shaft would be good . I can then see if it exactly the same .
As said in OP got some off of a 2005 unit ,but they are different .
TIA Al :y :y
-
Ok pal. The base of the knob itself is split in two iirc with a half moon cut out of one side.
I'll sort it out tonight.
If you want to drop me your details via pm, I'll pop it in the post if its the right one :y
-
sorted now thank you . . Admin lock please :y