1
Omega General Help / Re: knock sensor Where is it ?
« on: 20 July 2008, 10:55:38 »
Many thanks for all the replys gents
Marc
Marc
- 29 April 2024, 15:57:36
- Welcome, Guest
News:
Search the maintenance guides for answers to 99.999% of Omega questions
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega General Help / Re: knock sensor Where is it ?
« on: 19 July 2008, 21:43:10 »
Thanks Mike i will have another go at locating it when i get time
marc
marc
3
Omega General Help / Re: knock sensor Where is it ?
« on: 19 July 2008, 15:15:13 »
Thanks for that mate i just cant find the actual Knock sensor location on the drivers side as i need to replace the wiring or repair it but just cant work out wear the sensor is il keep trying
thanks for the reply though
thanks for the reply though
4
Omega General Help / knock sensor Where is it ?
« on: 19 July 2008, 14:41:15 »
Hi,
has anyone got any pictures of where the knock sensors are on a v6 ive looked in the manual but still cant find them i'm particularly after the drivers side as i think the wire is duff as its been off and on since i had my cambelt done but seems to have gone altogether, BUt i'm having trouble finding where it is can anyone help me out
Many Thanks marc
has anyone got any pictures of where the knock sensors are on a v6 ive looked in the manual but still cant find them i'm particularly after the drivers side as i think the wire is duff as its been off and on since i had my cambelt done but seems to have gone altogether, BUt i'm having trouble finding where it is can anyone help me out
Many Thanks marc
5
Omega General Help / Re: fault codes
« on: 13 July 2008, 15:35:47 »
Thanks mate il give it a go
marc
marc
6
Omega General Help / fault codes
« on: 13 July 2008, 12:37:09 »
Hi,
everyone can anybody shed some light on the fault code 135 on the motronic ecu ive got a 2.5v6 1997 and on looking at the code from the great lists that someone has produced it says check engine lamp (fault code lamp) low voltage
not quite sure what that means . At the moment i have a problem eith a knock sensor,the wiring is a biot fraid so at the moment it rgeisters a fault with the eml light staying on would this be related to the code 135
many thanks for any help
Marc
everyone can anybody shed some light on the fault code 135 on the motronic ecu ive got a 2.5v6 1997 and on looking at the code from the great lists that someone has produced it says check engine lamp (fault code lamp) low voltage
not quite sure what that means . At the moment i have a problem eith a knock sensor,the wiring is a biot fraid so at the moment it rgeisters a fault with the eml light staying on would this be related to the code 135
many thanks for any help
Marc
7
Omega General Help / manual air control
« on: 20 May 2007, 19:15:06 »
Hi gents
i have a problem with my air flow on my v6 It works fine on demist but will not change over to any other setting basically its stuck on demist
now ive taken the centre console out to see if there is anything a miss and couldnt see anything all the pipes seem to be connected and the selector is working fine but now im stumped as anyone got any ideas
Many thanks
i have a problem with my air flow on my v6 It works fine on demist but will not change over to any other setting basically its stuck on demist
now ive taken the centre console out to see if there is anything a miss and couldnt see anything all the pipes seem to be connected and the selector is working fine but now im stumped as anyone got any ideas
Many thanks
8
Omega General Help / Re: headlights
« on: 10 January 2007, 20:24:27 »
Thanks for the reply guys much appreciated 
9
Omega General Help / headlights
« on: 09 January 2007, 23:22:28 »
Hi , gents can anyone tell me what the best headlights are i.e which are the brightest as mine are crap
or i need to eat more carrots, and also do the xenons just fit straight in on a pre-facelift or is their extra wiring or fuses to add. And finally as anybody tried just using the xenon bulbs as a replacement and if so are they worth getting
Many thanks and Happy New Year to everyone!
or i need to eat more carrots, and also do the xenons just fit straight in on a pre-facelift or is their extra wiring or fuses to add. And finally as anybody tried just using the xenon bulbs as a replacement and if so are they worth getting
Many thanks and Happy New Year to everyone!
10
Omega General Help / Re: fault codes
« on: 12 October 2006, 15:44:20 »
Thanks The Boy
il do that this weekend and il let you know
many thanks for your help
il do that this weekend and il let you know
many thanks for your help
11
Omega General Help / fault codes
« on: 12 October 2006, 15:26:59 »
Gents
i posted the other day about the fault codes i am getting when i do the paperclip test
they are as follows:
73 air flow sensor low voltage
31 crankshaft sensor- does this come up because engine is not running?
57
135 Would this come up if a bulb had gone on the dash as i know one of mine has
and also
13 oxygen sensor
can anybody help please
i posted the other day about the fault codes i am getting when i do the paperclip test
they are as follows:
73 air flow sensor low voltage
31 crankshaft sensor- does this come up because engine is not running?
57
135 Would this come up if a bulb had gone on the dash as i know one of mine has
and also
13 oxygen sensor
can anybody help please
12
Omega General Help / Re: 2.5 v6 fault codes
« on: 10 October 2006, 16:25:12 »
I used the safety clip method when you say the bulbs missing whereabouts because my eml lights up fine or am i missing the point
other symptons from the car are its not idling too clever and it makes a ticking noise all the time which is probably the tappets which i will sort later But also the rubber pipe on the secondary front pipe dvrs side has melted a couple of times so ive been told exhaust may be blocked or non return valve knackerd
i was thinking the cat maybe on its way out any ideas
all help appreicated thanks
other symptons from the car are its not idling too clever and it makes a ticking noise all the time which is probably the tappets which i will sort later But also the rubber pipe on the secondary front pipe dvrs side has melted a couple of times so ive been told exhaust may be blocked or non return valve knackerd
i was thinking the cat maybe on its way out any ideas
all help appreicated thanks
13
Omega General Help / 2.5 v6 fault codes
« on: 10 October 2006, 15:48:44 »
Hi Gents
can anyone tell me or explain please what the following fault codes mean:
135 'check engine' lamp (fault code lamp) low voltage ?{ IS THIS RELATED
TO
37 engine self diagnosis (fault code light) low voltage { BTTY POWER
57 iscv -interuption
{does this mean its knackerd or needs cleaning
35 iscv- poor or no idle
13 oxy sensor no change in voltage/open circuit--Knackered?
any thoughts guys
many thanks
can anyone tell me or explain please what the following fault codes mean:
135 'check engine' lamp (fault code lamp) low voltage ?{ IS THIS RELATED
TO
37 engine self diagnosis (fault code light) low voltage { BTTY POWER
57 iscv -interuption
{does this mean its knackerd or needs cleaning
35 iscv- poor or no idle
13 oxy sensor no change in voltage/open circuit--Knackered?
any thoughts guys
many thanks
14
Omega General Help / Re: 2.5 v6 cd probs
« on: 08 October 2006, 22:15:39 »
This is melting the other one and its not idling too clever either
15
Omega General Help / Re: 2.5 v6 cd probs
« on: 08 October 2006, 22:11:27 »
Ye ive thought about changing that before i go for a cat is that a common fault