Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: 456lbft on 28 July 2020, 13:30:48

Title: Breaking 3.2 Elite Saloon
Post by: 456lbft on 28 July 2020, 13:30:48
As per subject.  The engine, wheels and all the interior switches are spoken for, but pretty much everything else is up for grabs.  Parts can be shipped or collected from Near Daventry, Northants.
Not many body panels aren't damaged or rusty, but the sunroof works and I definitely don't need that, or the beige leather interior ;)
(https://i.postimg.cc/qMFGNJgN/20200613-141811-resized.jpg)
(https://i.postimg.cc/3NJZvWgv/20200613-155601-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: P6UL K on 28 July 2020, 16:14:23
Hi, I知 after the 4x door puddle lights. Also what are the buttons like on the heater control panel?

Thanks.
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 28 July 2020, 16:53:30
Hi, I知 after the 4x door puddle lights. Also what are the buttons like on the heater control panel?

Thanks.
Heater panel buttons are not very good.  I'll see if the puddle lights are present and working and let you know.
Title: Re: Breaking 3.2 Elite Saloon
Post by: VXL V6 on 28 July 2020, 17:51:59
How quickly do you need to dispose of the car?

There's a few bits I am interested in but not able to collect for at least a few weeks.  :y
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 28 July 2020, 17:55:41
Hi, I知 after the 4x door puddle lights. Also what are the buttons like on the heater control panel?

Thanks.
Heater panel buttons are not very good.  I'll see if the puddle lights are present and working and let you know.
(https://i.postimg.cc/dthTxmZY/20200728-174158-resized.jpg)
If this is what you mean by puddle lights, they all seem to work and will be available when the doors are stripped.
(https://i.postimg.cc/26TBP0xz/20200728-174316-resized.jpg)
The car is being stripped over the next few weeks, I need the shell gone by September so let me know what you need and we can test them before it comes apart, all the parts wanted can then be stored until sold.
Title: Re: Breaking 3.2 Elite Saloon
Post by: P6UL K on 28 July 2020, 21:44:28
Hi, I知 after the 4x door puddle lights. Also what are the buttons like on the heater control panel?

Thanks.
Heater panel buttons are not very good.  I'll see if the puddle lights are present and working and let you know.
(https://i.postimg.cc/dthTxmZY/20200728-174158-resized.jpg)
If this is what you mean by puddle lights, they all seem to work and will be available when the doors are stripped.
(https://i.postimg.cc/26TBP0xz/20200728-174316-resized.jpg)
The car is being stripped over the next few weeks, I need the shell gone by September so let me know what you need and we can test them before it comes apart, all the parts wanted can then be stored until sold.

No worries on the heater control panel, but definitely interested in the door puddle lights. Don稚 worry too much if any bulbs have blown as I知 just looking to replace a couple of mind where the clear plastic lenses have fell off
Title: Re: Breaking 3.2 Elite Saloon
Post by: minifreek on 01 August 2020, 12:40:37
What would you want for the boot hinges please, would need posting to Wigan.

Can you PM me with price etc...

Ta

Matt
Title: Re: Breaking 3.2 Elite Saloon
Post by: VXL V6 on 01 August 2020, 13:51:27
Hello

Couple of questions!

What's the general condition of the rear bumper? Not worried about light scratches etc as would need to be resprayed correct colour.

How leak free and noisy is the diff?
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 01 August 2020, 20:59:19
What would you want for the boot hinges please, would need posting to Wigan.

Can you PM me with price etc...

Ta

Matt
As soon as they are off I'll let you know, do you want the springs as well?
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 01 August 2020, 21:05:03
Hello

Couple of questions!

What's the general condition of the rear bumper? Not worried about light scratches etc as would need to be resprayed correct colour.

How leak free and noisy is the diff?
Bumper is scratched but not cracked as far as I can tell, and has reversing sensors if you want them or I'll keep them, but then there will be holes in it :-\
Diff is surprisingly dry as far as I remember. I have only driven it up and down outside the factory, so can't tell much, but it seemed ok, and not limited slip otherwise I'd be keeping it ;) I'll post up more pictures as soon as I can.
Title: Re: Breaking 3.2 Elite Saloon
Post by: VXL V6 on 01 August 2020, 23:00:17
Hello

Couple of questions!

What's the general condition of the rear bumper? Not worried about light scratches etc as would need to be resprayed correct colour.

How leak free and noisy is the diff?

That would be great, thanks  :y
Bumper is scratched but not cracked as far as I can tell, and has reversing sensors if you want them or I'll keep them, but then there will be holes in it :-\
Diff is surprisingly dry as far as I remember. I have only driven it up and down outside the factory, so can't tell much, but it seemed ok, and not limited slip otherwise I'd be keeping it ;) I'll post up more pictures as soon as I can.
Title: Re: Breaking 3.2 Elite Saloon
Post by: VXL V6 on 01 August 2020, 23:02:21
Doh!!!

Yes, pictures and a idea of price would be great thanks.  :y

Title: Re: Breaking 3.2 Elite Saloon
Post by: minifreek on 02 August 2020, 09:48:24
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 03 August 2020, 08:32:27
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)
Title: Re: Breaking 3.2 Elite Saloon
Post by: New POD on 03 August 2020, 08:53:31
Sent you a Pm or 2
Title: Re: Breaking 3.2 Elite Saloon
Post by: minifreek on 03 August 2020, 22:09:53
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 05 August 2020, 08:45:08
Xenon headlights, as shown, LHS-NS has all top mounting lugs broken :(, otherwise both work fine.
」30 for pair + 」10.80 postage unless collected
(https://i.postimg.cc/9MnnzLXb/20200804-182037-resized.jpg)
(https://i.postimg.cc/xCCZ0wQq/20200804-182055-resized.jpg)
(https://i.postimg.cc/9z3gYz7q/20200804-182111-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 05 August 2020, 08:49:02
Headlight level sensors, untested 」20 the pair + 」6.00 mainland postage if required. Ask if you are over the water.
(https://i.postimg.cc/XqBD59pb/20200804-182148-resized.jpg)
https://i.postimg.cc/g0G57wBV/20200804-182218-resized.jpg (https://i.postimg.cc/g0G57wBV/20200804-182218-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 05 August 2020, 09:02:35
Headlight level sensors contd
(https://i.postimg.cc/g0G57wBV/20200804-182218-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 05 August 2020, 09:07:28
(https://i.postimg.cc/Hk5RNTQB/20200713-180306-resized.jpg)
Inner boot mounted light units 」24/pair + mainland postage 」10.80
Boot spoiler (Prodrive) in green 」24 + 」10.80 postage
Boot lid liner grey and push fit clips 」10 collection only
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 06 August 2020, 15:52:49
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 06 August 2020, 16:31:41
Hello

Couple of questions!

What's the general condition of the rear bumper? Not worried about light scratches etc as would need to be resprayed correct colour.

How leak free and noisy is the diff?
Bumper with reversing sensors 」60 + collection only, too big to post.  Bit of a bruise on LHS, but no obvious distortion to the panel, so will polish/paint out.
(https://i.postimg.cc/c1w7ZcC7/20200805-180741-resized.jpg)
(https://i.postimg.cc/ZqnFStv0/20200805-180215-resized.jpg)
(https://i.postimg.cc/pdSQVGKC/20200805-180358-resized.jpg)
Picture of diff to follow, looks dry though 2003 car on 115000miles open not limited slip.
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 07 August 2020, 15:55:36
Sunroof cartridge complete, was working before removal.  Glass metal trim surround is bubbling, see pictures. 」60 collection only, or delivery by hand 30 mile radius of Daventry by arrangement 」12.
(https://i.postimg.cc/gJbhL0H7/20200807-145236-resized.jpg)
(https://i.postimg.cc/85d6RVyz/20200807-145254-resized.jpg)
(https://i.postimg.cc/GtcszSNJ/20200807-145322-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 07 August 2020, 17:10:15
Hello

Couple of questions!

What's the general condition of the rear bumper? Not worried about light scratches etc as would need to be resprayed correct colour.

How leak free and noisy is the diff?
Diff pictures, it is a 3.2V6 Auto so 3.7:1 ratio, 」90 collected incl ABS sensors but not mounting rubbers (Fubar).
As you can see there are no obvious leaks, and it was quiet in 1st gear at least, sold as seen.
(https://i.postimg.cc/V6Fx0DCb/20200807-161249-resized.jpg)
(https://i.postimg.cc/BbQdTHT7/20200807-161300-resized.jpg)
Title: Re: Breaking 3.2 Elite Saloon
Post by: Doctor Gollum on 07 August 2020, 17:34:57
Auto should be 3.9 diff ;)
Title: Re: Breaking 3.2 Elite Saloon
Post by: GastronomicKleptomaniac on 08 August 2020, 13:19:18
Please could I have the interior light plug (968571-1) stamped on it. If its on your car - with as much loom as possible?

Also if the interior light housing is 90460836, that as well?

Thank you!
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 09 August 2020, 10:59:04
Auto should be 3.9 diff ;)
Of course it is silly me, I should know better.
Title: Re: Breaking 3.2 Elite Saloon
Post by: minifreek on 09 August 2020, 11:53:35
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.

Ill leave them at that price please. Too much for me...

Thanks
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 09 August 2020, 12:34:05
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.

Ill leave them at that price please. Too much for me...

Thanks
I am open to offers, everything must go, at least they are easy to get to and take off, unlike some bits.  Bear in mind hassle of postage these days, queuing in a mask at the PO tends to get tedious after a while, collection much preferred.
Title: Re: Breaking 3.2 Elite Saloon
Post by: omegod on 09 August 2020, 16:55:48
Spoilers usually go easily for 」50 + via ebay when I have them  :y
Title: Re: Breaking 3.2 Elite Saloon
Post by: Nick W on 09 August 2020, 17:13:38
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.

Ill leave them at that price please. Too much for me...

Thanks


You know you can buy a pair of new gas springs for about 」20? LINK (https://www.strutsdepot.com/product/2-x-new-universal-400n-gas-springs-struts-250mm-to-600mm-w-m8-ball-studs-nk/?attribute_size=450mm&utm_term=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwvb75BRD1ARIsAP6LcquMsFGuY5pZ90006BfRYPKdOZAsYaJgfOkn-GCKLT-_UMF-pl3m8p8aAjcnEALw_wcB)
Title: Re: Breaking 3.2 Elite Saloon
Post by: biggriffin on 09 August 2020, 19:43:49
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.

Ill leave them at that price please. Too much for me...

Thanks


You know you can buy a pair of new gas springs for about 」20? LINK (https://www.strutsdepot.com/product/2-x-new-universal-400n-gas-springs-struts-250mm-to-600mm-w-m8-ball-studs-nk/?attribute_size=450mm&utm_term=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwvb75BRD1ARIsAP6LcquMsFGuY5pZ90006BfRYPKdOZAsYaJgfOkn-GCKLT-_UMF-pl3m8p8aAjcnEALw_wcB)


 But they aren't genuine ;D
Title: Re: Breaking 3.2 Elite Saloon
Post by: New POD on 10 August 2020, 08:22:29
email and PM sent ref some parts  :y
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 10 August 2020, 09:40:32
If you mean the rams...? Then yes, can't remember if they have actual springs on them or not...?

Thanks
Yes the rams are gas springs :)

Then yes please :)
Boot hinges and rear gas struts are 」36/pair + 」8.40 mainland UK postage/carrier.

Ill leave them at that price please. Too much for me...

Thanks


You know you can buy a pair of new gas springs for about 」20? LINK (https://www.strutsdepot.com/product/2-x-new-universal-400n-gas-springs-struts-250mm-to-600mm-w-m8-ball-studs-nk/?attribute_size=450mm&utm_term=&utm_source=google&utm_medium=cpc&gclid=Cj0KCQjwvb75BRD1ARIsAP6LcquMsFGuY5pZ90006BfRYPKdOZAsYaJgfOkn-GCKLT-_UMF-pl3m8p8aAjcnEALw_wcB)
Ok, fair enough, thanks for the link, I'll post the hinges and rams to you complete for 」36 total or I'll just keep them for my own stock, especially as I have another car coming which may need them. These ones are slightly slow to get to full extension with a boot spoiler fitted, but work fine without.
Title: Re: Breaking 3.2 Elite Saloon
Post by: 456lbft on 10 August 2020, 09:49:17
Please could I have the interior light plug (968571-1) stamped on it. If its on your car - with as much loom as possible?

Also if the interior light housing is 90460836, that as well?

Thank you!
PM sent
Title: Re: Breaking 3.2 Elite Saloon
Post by: minifreek on 13 August 2020, 17:46:11
Keep them mate, I can get them cheaper with springs.

Thanks