Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: jacko on 18 September 2021, 14:21:46
-
Hi chaps
Just replaced rocker gasket new plugs
Air filter
Running awful on tick over have two codes
What could this be
P1700
P1781
:(
-
http://www.bba-reman.com/forums/Topic53834.aspx
-
Nonsense.
Replace the Cam Sensor with a genuine one from a Vauxhall Dealer you genuinely have to walk into.
And report back.
On that engine, those codes have absolutely nothing to do with the gearbox or its ecu. ;)
-
So doctor your saying those codes are cam sensor to be clear 👍
-
Exactly :y
That's to say the codes suggest imminent gearbox death.
The actual cause is a failing cam sensor. ;)
-
Thanks doc will post when I have replaced it :y
-
Good luck with the replacement, I found it to be a complete pig on my 2.2, one of the most awkward jobs I've ever done.
-
There's a "How To" guide here (http://www.omegaowners.com/forum/index.php?topic=90628.0).
-
Ahh, I meant the crankshaft position sensor :-[. The cam sensor is not so bad. ;D
-
I presume all the vacuum and wiring connectors that were undone for the cam cover change have been double-checked, could just be an air leak.
p.s. I'm not an expert on 2.2s by any means