Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[woolley11]

Thanks for that part no - 9120630 - that’s the ones I’m trying to find 👍

Need to buy them now but seem ££££ 🥴

[dave the builder]

B8.4D Twist Lock clicky  
same as the oil /battery light / ABS etc lamps in the binnacle 

[woolley11]

Well this is getting a nightmare - for part number 9120630

Rang Vauxhall near us - nothing held, listed at the factory stock nor at the Parts Hub.

Rang Euro car parts - nothing listed or cross matched to that number now - discontinued

Seen a couple of bulbs on ebay using that part number in Germany for £30 

I've got about 20 of the standard fitment ones, I will have to see if I can alter them in any way and practice in an old control panel as don't want to damage the printed circuit

A simple job ........

[YZ250]

There’s 5 of them and think they are one unit and can’t withdraw the bulb on that particular style.

If I could post a pic easily I would to show the different style, but haven’t got facility to do so.

The bulb holders are clearly different. I just don’t want to damage the printed board.

I’ll try a few part numbers but online shops seem to do one style - the wrong one

Just to clarify that the image below is what you want the bulbs for.



I was lucky with my climate panel, it had the bulb and holder as shown below.


So I could just pop in to Halfords and buy these shown below to replace the bulbs.



I appreciate that they must have used different bulb and holder, fixed and replaceable bulb, in the same fitment as not all of them had a detachable bulb on Part No. 9120630 apparently. 

Good luck in your search.

[woolley11]

Yes they are the ones I need - been to Halfords and nothing at all in stock like it - only the actual bulbs to push into the holders

Well its strange as the replacement control panel I have will only accept the bulbs I need (the ones in your pic) - maybe the older control panel may have been slightly different ??

I therefore have only 1 bulb holder that will fit into the replacement control unit

I have actually sourced 2 bulbs today from a Renault Dealer this morning in our village - but he only had 2 off

[sjc]

I have 1 of the holders that you can replace the bulb in - yours if you pm me your address.

Used to have a big bag of various GM bulb holders but binned them in my big garage clearout at the start of LD1

[woolley11]

Right - I’ve done it 

Got 3 of the right bulbs fitted and 2 others I’ve managed to bend to fit the contacts tight.

Anyway I’ve test fitted it all - all lights work without wobbling

Heater works too which is why I stripped it out in the first place.

Result !! - thanks for support & help

Useful to know that there could he an issue with panel bulbs 🤔

[YZ250]

Right - I’ve done it 

Got 3 of the right bulbs fitted and 2 others I’ve managed to bend to fit the contacts tight.

Anyway I’ve test fitted it all - all lights work without wobbling..........

Nice one. 

[TheBoy]

Great news, and nice job