Topic: Price of a full exhaust on a 2.6? (Read 3843 times)

vegasgo · « **on:** 21 January 2011, 13:24:00 »

The exhaust on my 2.6 auto has fallen off, the whole lot needs replacing, inc cats. Local garage quoting around £550 plus labour. I nearly fainted! Do they really cost this much? Thanks.

Aundie · « **Reply #1 on:** 21 January 2011, 13:39:21 »

just priced a system for my 3.0l was about £350 from downpipes back (not including downpipes).

Lazydocker · « **Reply #2 on:** 21 January 2011, 13:42:30 »

If that includes cats it's quite reasonable from a garage

Will they let you supply the parts? You could get them cheaper from a couple of sources

Should add... May be worth speaking to someone like Powerflow to see what they can do in Stainless

Aundie · « **Reply #3 on:** 21 January 2011, 13:43:13 »

take a look here
http://www.cats-direct-shop.co.uk/exhaust-system-details.php?ID=390666

Aundie · « **Reply #4 on:** 21 January 2011, 13:47:32 »

thats just parts cost mate.

Kevin Wood · « **Reply #5 on:** 21 January 2011, 14:02:15 »

I would get some second hand cats from someone breaking an Omega (don't expect to get a great deal, as they got for good money scrap) then get the rest of the system from www.eternalcar.com.

Kevin

RobG · « **Reply #6 on:** 21 January 2011, 14:02:24 »

Lot cheaper here & decent quality. Fit yourself or ask a friendly garage http://stores.ebay.co.uk/Eternalcar/Vauxhall-/_i.html?_nkw=omega&_fsub=6253881&_sid=239919514

V6 CDX-er · « **Reply #7 on:** 21 January 2011, 14:05:19 »

Quote

thats just parts cost mate.

There isn't really all that much to an exhaust. granted, it would be an easier job with two people, but tools wise and technical ability wise, it, (cross fingers), shouldn't be a difficult job. Time consuming, yes. Difficult, no.

4x high axle stands.
Rubber or soft faced mallet.
Lots of Plus-Gas / penitrating fluid.
A breaker bar, ratchet and a selection of sockets, (including deep) in the sizes(s) needed for the nuts / bolts.

I reckon it would be possible to do the job over a weekend? So the question is, would you want to and save yourself a couple of hundred quid? Don't forget to factor in the cost of any new gaskets, rubbers, mounts and exhaust paste.

Tonka. · « **Reply #8 on:** 21 January 2011, 14:13:05 »

I got mine, from cats back, from Eternal for £119.

Gave my allignment/tyre/ehaust guy £20 to fit. Sorted

vegasgo · « **Reply #9 on:** 21 January 2011, 14:29:49 »

Thanks for the replies.

I don't know if the cat can be saved - at the join where the box is, is a rubbery joining tube and my mechanic said that can't be saved as it has to be welded? Maybe worth a second opinion?

tunnie · « **Reply #10 on:** 21 January 2011, 15:13:28 »

why do the cats need replacing, did they fall off too? If you still have them, re-use them, pattern cats are shyte...

cat back exhausts from eternal would be about £120 +vat, they don't list the 2.6, but the 2.5 systems are the same, just tail pipe is a little shorter

vegasgo · « **Reply #11 on:** 21 January 2011, 15:24:31 »

They haven't fallen off, but the one on the passenger side has some rubber tubing around a join - I don't know if this is normal so will take it to Kwik Fit for their opinion.

tunnie · « **Reply #12 on:** 21 January 2011, 15:27:44 »

Quote

They haven't fallen off, but the one on the passenger side has some rubber tubing around a join - I don't know if this is normal so will take it to Kwik Fit for their opinion.

Take some photos of it and post them here, get a much better evaluation of the problem

RobG · « **Reply #13 on:** 21 January 2011, 15:28:21 »

Quote

They haven't fallen off, but the one on the passenger side has some rubber tubing around a join - I don't know if this is normal so will take it to Kwik Fit for their opinion.

....and they`ll tell you it`s knackered "but we can supply & fit one for you sir at a discounted price"

Kevin Wood · « **Reply #14 on:** 21 January 2011, 15:33:23 »

Quote

Quote
They haven't fallen off, but the one on the passenger side has some rubber tubing around a join - I don't know if this is normal so will take it to Kwik Fit for their opinion.
....and they`ll tell you it`s knackered "but we can supply & fit one for you sir at a discounted price"

..and while you're at it, did you know your brakes need doing and your tyres are down to "only" 6mm of tread...

Kevin

vegasgo · « **Reply #15 on:** 21 January 2011, 15:37:11 »

Aware of their 'policies' - doubt will go with them just want a second opinion. Will try and do a pic.

tunnie · « **Reply #16 on:** 21 January 2011, 16:22:23 »

Quote

Aware of their 'policies' - doubt will go with them just want a second opinion. Will try and do a pic.

Only thing they are good for is getting it on the ramps, and letting you take a photo!

dbr · « **Reply #17 on:** 21 January 2011, 17:03:50 »

dont forget the shocks will be shot also

vegasgo · « **Reply #18 on:** 21 January 2011, 17:38:20 »

No hard sell from them, comfirmed diagnosis - all rotten, cat blowing at the flexy part in the middle. Quoted £750 all in!

To my shame, my Omega is actually a 2.2, not 2.6. onlineautomotive.co.uk quoting £348 for a full system. £60 to fit by me mechanic, so £410 looking a lot better.

On ebay, there's 2 different prices for the Cat, 99-01 and 99-03 - which would be mine?

tunnie · « **Reply #19 on:** 21 January 2011, 18:01:58 »

Quote

No hard sell from them, comfirmed diagnosis - all rotten, cat blowing at the flexy part in the middle. Quoted £750 all in!

To my shame, my Omega is actually a 2.2, not 2.6. onlineautomotive.co.uk quoting £348 for a full system. £60 to fit by me mechanic, so £410 looking a lot better.

On ebay, there's 2 different prices for the Cat, 99-01 and 99-03 - which would be mine?

Right, is the actual cat corroded, or the flexi join post cat before the exhaust splits into the Y for the centre boxes?

If so, this is not part of the cat, and costs just £15 for the part!

Cat back exhaust from eternal is £120 + vat!!!

£410 is insane, should cost you sub £200 easy

vegasgo · « **Reply #20 on:** 21 January 2011, 18:27:31 »

As far as I know, it is blowing only at the flexi joint. The cat itself I think is fine. Third opinion?

tunnie · « **Reply #21 on:** 21 January 2011, 18:47:21 »

The flexi join is the common failure, cats, unless its been physically damaged (hit a rock or something) should be fine.

The flexi is part of the cat, but it can be cut off and a replacement welded on.

OmegaGav · « **Reply #22 on:** 21 January 2011, 19:15:10 »

Quote

dont forget the shocks will be shot also

That will be after driving over the purposely dug 9 inch pothole on the entrance to there smashing fast fit centre

V6 CDX-er · « **Reply #23 on:** 21 January 2011, 21:48:11 »

Quote

dont forget the shocks will be shot also

And your battery is knacked.

Radar · « **Reply #24 on:** 21 January 2011, 21:56:48 »

If you go for the new flexipipe make sure the actual flexi (criss cross mesh bit) is 4 inches long and not the whole thing is 4 inches long.

Andy B · « **Reply #25 on:** 21 January 2011, 22:08:41 »

Quote

...
To my shame, my Omega is actually a 2.2, not 2.6. .......

2.2 ....... four cylinder in-line
2.6 .........V6
hard to tell apart

vegasgo · « **Reply #26 on:** 23 January 2011, 22:52:53 »

Would this one work>

http://cgi.ebay.co.uk/Exhaust-Flexi-Pipe-Joint-100mmx51mm-Weld-on-Flexible-/150430552937?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item23065c1369

RobG · « **Reply #27 on:** 23 January 2011, 22:58:18 »

Yep, that`ll fit..........and FYI the exhaust from a 2.0ltr will also fit the 2.2 and it`s cheaper

vegasgo · « **Reply #28 on:** 23 January 2011, 23:29:20 »

Thanks. Doesn't the 2.0 have only 1 central silencer?

KeithmG · « **Reply #29 on:** 24 January 2011, 07:56:15 »

Hi. I have just ordered a cat back system for a 2.5v6 from eternalcar as a replacement a 2.6v6 on the recommendation of forum members. Order was by phone and eternalcar say that this will not fit. Before payment is made can anyone reconfirm this will fit PLEASE

sotmh · « **Reply #30 on:** 24 January 2011, 08:58:43 »

If cat needs replacing, came across following

http://cgi.ebay.co.uk/VAUXHALL-OMEGA-2-0i-CATALYTIC-CONVERTER-CAT-94-99-/130474557783?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e60e3c157

V6 CDX-er · « **Reply #31 on:** 26 January 2011, 00:49:29 »

Quote

Hi. I have just ordered a cat back system for a 2.5v6 from eternalcar as a replacement a 2.6v6 on the recommendation of forum members. Order was by phone and eternalcar say that this will not fit. Before payment is made can anyone reconfirm this will fit PLEASE

Bump.....?

My centre sections are like Swiss cheese, so I wouldn't mind knowing the definative answer to this also please chaps?

Elitenut · « **Reply #32 on:** 26 January 2011, 07:53:51 »

Yes it does fit. But you do need to buy an extension for the tailpipe from halfords as it stops short of the back bumper.
I fitted there system to my 2.6 last year.

V6 CDX-er · « **Reply #33 on:** 26 January 2011, 13:28:48 »

Quote

Yes it does fit. But you do need to buy an extension for the tailpipe from halfords as it stops short of the back bumper.
I fitted there system to my 2.6 last year.

Cheers

Are the centre sections the same?

Elitenut · « **Reply #34 on:** 26 January 2011, 14:51:32 »

Yes, its just the back box tail pipe thats short so need an aftermarket Chrome Tail Pipe Trim to bring out from the rear bumper.

neilr · « **Reply #35 on:** 26 January 2011, 16:03:08 »

just a quick note i need same for 2.6 but noticed the 3.0 rear box is cheaper and has twin rear pipes

omega squared · « **Reply #36 on:** 11 April 2011, 17:29:37 »

Just to bump this back up will a 2.6 cat back system fit my 3.0?

Looks the same apart from the 3.0 having a twin pipe silencer, the hangers look the same (looking at the photo).

Both off same year estate cars - 2000 - so will the 2.6 fit on a 3.0?

omega squared · « **Reply #37 on:** 05 May 2011, 13:32:05 »

Just to follow this up

The 2.6 exhaust fitted my 3.0 no problem only difference was visual with it having a single exit tail pipe not twin but fitted fine brackets and mounts were the same.

The 2.6 was a 2002 estate and my car is a 2000 estate 3.0.

jb · « **Reply #38 on:** 06 May 2011, 05:15:09 »

the 3.0 box fits the 3.2/2.6 and 2.5 with no probs

News:

Author Topic: Price of a full exhaust on a 2.6? (Read 3843 times)