Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: danasapunas on 26 January 2019, 05:32:41
-
Hi, i converted opel omega 3.2 v6 auto gearbox to manual.I can not find ground one of the pins on the ecu. 3.0 ecu I know 42 pin to gruond. how 3.2?
-
Easiest way is to reconfigure the Engine ECU (and ABS I think) to manual. Worth doing the display at same time. Tech2 required to do so.
-
Different Map.
-
Different Map.
That reminds me ::)
One day I must get to the bottom of why my cruise control only works in the first 4 gears since my conversion :( :-[
-
Different Map.
That reminds me ::)
One day I must get to the bottom of why my cruise control only works in the first 4 gears since my conversion :( :-[
That must be a pain in the arse, cruising down the M1 in 4th gear, dont have Cruise on my 3.2 Manuals so cant help with that one. :-\
Talking of Cruise bits, must be that time of year again where I PM you about the Cable one. ;D
-
Different Map.
That reminds me ::)
One day I must get to the bottom of why my cruise control only works in the first 4 gears since my conversion :( :-[
That must be a pain in the arse, cruising down the M1 in 4th gear, dont have Cruise on my 3.2 Manuals so cant help with that one. :-\
Tbh, due to work or no work, its either been town or a blast down the hilly bits to the caravan so never get the chance for cruise in 5th recently ;D
Must look into it some more sometime :-\
Maybe pop and hassle that nice Mr Fuse sometime if he hasn't done a runner since I wrote his address down :D
Talking of Cruise bits, must be that time of year again where I PM you about the Cable one. ;D
Oh FFS :-[
Sorry, had a busy year with various shite to deal with hence not been around here much :-[
The wife now knows to nag me so i'll get onto it :-[ :-[