Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - DrAndyB

Pages: 1 2 3 4 5 [6] 7 8
76
I was minding my own business in shops the other day and I noticed that the petrol additive for cleaning injectors (STP brand I think) had two flavours, one was for "Suitable for Fuel injection" engines the other for "carburetor" based engines.

When I examined the bottles BOTH appeared to have the SAME red looking liquid, same shade and appeared same viscosity ( well, shook both bottles and appeared identical ! So not that scientific !)

The information and blurb on bottles was identical other than one making the reference to Injectors.

One however was HALF PRICE !  (The carburetor one) and so the thought occurred that would it matter which one I used ?

Also I guess, is it worth using the stuff at all ???????

Thoughts ????

(There was a different 3rd one for Diesel so not mixed up with that one !!!)

77
Omega General Help / Replacing main battery
« on: 13 March 2015, 22:32:53 »
Looks like need to treat her to new main battery.

What is the recommended process for removal and fitting ?

I have a MFL 2.5V6 CDX on a V plate.  Looks like there is a 72Ah one same dimensions  :y

Am I correct that process is:

  • Turn ignition off and remove key
  • disconnect negative within 15 sec
  • then disconnect positive and make cuppa
  • remove old and locate new battery connecting positive terminal first then negative
  • enter radio code and start car as normal

I read somewhere about needing to reset key immobiliser and windows ???? Or is this not necessary ?

Thanks in advance.

Andy.

78
Doing some digging about, are Delphi the Manufacture of OEM A/C Condensers for GM ??????  ???  (found this pic below).

They do seemed to be a little more expensive to buy than cheaper branded ones (NRF or BOLK), but were not as extortionate as Vauxhall when I called them today  :'()  Good job I was sitting ! :D




79
Hi all,

Air con now stopped again, after regas a couple weeks ago.  I therefore started to supect something more than the HP and LP valves (which have been done  :y)

Anyhow, as I had the front grille off (to sort washer bottle sensor) I notice this on the A/C condenser/rad.  I assume this is why its now stopped !! 

Green A/C Dye leak appears quite noticeable on rhs at the bottom to middle section.

Are they easy to change ?  and are there any particular makes / suppliers to go for ?  Original GM one ?

I assumed best get new drier at same time ?

What would be cost to get all sorted ?

Thanks in advance.
Andy.
(Just cleaned the old girl up as well  :'( http://www.omegaowners.com/forum/index.php?topic=129223.0)




80
Omega Gallery / Freshly Cleaned and Waxed MFL V6 - Manual :)
« on: 07 March 2015, 16:02:01 »
Just treated the old girl to its 6 monthly Auto Glym Super Resin Polish, finished of this time with the Extra Gloss Protection. 

She does polish up nice  :y

Just gotta sort AC Condenser out  :-[ (Help if in Cheshire/Wirral  ;))












81
Hi,

Went to drive the wifes Touran (05 Plate 2.0 TDI Sport DSG) and the cruise control not work  :(

Light on dash should come on when turn switch on indicator stalk to on, and NO light !!  It has done this once a while ago, but a turn engine off and on and all Ok !

Its not playing ball at all now. 

Usual suspects are:

  • Brake light switch - I assume this is OK as brake lights works !
  • Indicator stalk switch contacts not working - I found a guide on how to take apart and clean - This is now done and no difference  :'(
  • Fuse 7 in engine bay is part of cruise control - This fuse is fine
  • Fuse 4 in cabin also claimed to be same part of cruise control - NO FUSE here - never was ! Assume engine bay Fuse 7 is the one and is fine

Maybe common issue of Golf Mk 5 and Golf Plus as share much DNA !

One suggestion is new indicator/cruise stalk.   I have done this my Dads Face Lift Omega (Desmond - CD model to retro fit Cruise  :y).  Easy as not need to remove the steering wheel, but I can't seemed to find if the same applies for Touran.  I don't fancy removing the wheel and airbag in face  :-[

Any thoughts ?

82
Hi.

I have a nice new 5l sealed bottle the GM 10W/40.  Purchased from reputable flea bay seller/garage (I assume !). 

Holograms check out and label identical to the previous 5l bottle I still have on garage shelf ! so no reason to suspect counterfeit (I did see subtle label difference in other ones advertised so I steered clear of them in case they were counterfeit !

Anyhow, I notice date stamp on the container is 28/01/2014.  :o

Question:  Is the oil out of date ?  Is it OK to use ? ???

Contain sealed up (perhaps a bit dusty !)

Thanks in advance.
Andy.




83
Big thanks to Daz following my earlier post   :y

New Genuine GM Rocker cover gaskets fitted, both sides  :y (and new O ring bolts !) And car running sweet.

Good for another 14 years or 59k mls !!!!!

Thanks again Daz for your time, especially at the short notice and on a Friday night.

A true gent and recommended.  :y

Andy.

p.s. hope that chap gets his coat back !!



84
Omega General Help / Rocker cover gasket ??? V6
« on: 10 February 2015, 23:35:21 »
Hi all,

I suspect I have a slight oil residue coming from LHS of drivers side V6 bank.  Looks like right on edge of the black rocker cover.

I suspect rocker cover gasket.

Is this a concern in short term ? 

Is it common ?

Is it simple fix ?

Cheers in advance.

Andy.

P.s
It's MFL 2.5 V6 - V plate- 59k mls.

85
    I have noticed there are a few 'spray on' underseal products about.

    Since my baby is always kept in the garage in dry (kept under her warm Duvet ;)), is it worth giving the underside a bit of TLC ?

    • Anybody used any of the spray on underseals ?
    • Is it worth doing just really to 'Keep on top of things and keep the underside protection up to scratch ?
    • Anybody recommend any brands / particular stuff ?

    I only ask since I have just had the arches and door sorted, they wax oiled the wheel arches so look brand new.  Thought I may therefore give the whole underside a spray if thought worth it ?

    Thoughts welcome and merry chrismas to all  :y



86
The liquidators are auctioning off some of the kit at Marussia.

Link below.

http://auctionhq.net/view-auctions/catalog/id/91/

Some interesting items  :y


87
General Discussion Area / Nice Christmas Tree !!!
« on: 14 December 2014, 17:37:03 »
Thats the tree sorted ! :y :y


88
Hi all,

A while ago I got a bit of localised very hot spot on the drivers seat and smell  >:(

My deductions are heated seat element is buggered.

It is a Mini Facelift 2.5V6 CDX.  I have read that they are easiy"er" to do ? (noticed post for leather seats which sounded a like surgery was required ?)

  • Are they simple to repair wthout major surgery for a Cloth Trim seat ?
  • Can get the replacement elements ?

If its major surgery, then I shall leave it (not used them for a year or two now since the hot posterior eppisode at the traffic lights  :D ) as not dared to turn on since  :-\

My post at http://www.omegaowners.com/forum/index.php?topic=127630.0 actually shows the seats  :y

Thanks in advance. 

89
Omega Gallery / New Leather Handbrake and Gearstick Gaitors
« on: 06 December 2014, 18:35:55 »
Hi all,

Following on from my earlier pics http://www.omegaowners.com/forum/index.php?topic=127030.0 :y following my newly treated and painted wheel arches and rear doors (caught early hopefully to avoid the rot  :y), below is the new newly proper leather covered handbrake and Gearstick Gaiters from the local custom trim specialists opposite where I work  :y

They have done a fantastic job and the trim match is superb.

Well happy.  My car is like new with nice smell of leather :D




90
Hi.

Getting Gaiters re-done in soft leather  :D

How does the Handbrake one remove ?  Looks like there are a few plastic clips, but do any screws need to be removed from the centre console as its not coming away easilly from the console  ;D  (it is the original GM one). 

A few screws are present holding I assume the black felt console cubby hole liner in, but does this need to be unscrewed and lifted to remove gaiter ?

I didn't want to wrestle too much with it in case I broke something  >:(

Thanks in advance.
Andy.

Pages: 1 2 3 4 5 [6] 7 8

Page created in 0.025 seconds with 17 queries.