Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Mutha Jugs n Speed on 11 February 2024, 19:16:00
-
Is there a difference between the pads for non vented and vented rear disks, and also the handbrake shoes etc as well Possibly needing both.Tia. :y
-
All the rear brake components are the same regardless of vented or not... EXCEPT:
Discs, calipers, pad retaining pins and anti rattle springs. This is because the pads are 8mm thicker and the associated parts are 8mm wider/longer to accommodate the extra disc thickness :y
-
Many thanks Al, think I'll have a rummage in the shed, before shopping for bits....possibly could get lucky ::)
-
All the rear brake components are the same regardless of vented or not... EXCEPT:
Discs, calipers, pad retaining pins and anti rattle springs. This is because the discs are 8mm thicker and the associated parts are 8mm wider/longer to accommodate the extra disc thickness :y
Edited for a typo. ::)
-
Just a thought....do the rears have wear indicators?
-
Just a thought....do the rears have wear indicators?
No wear sensor on rears. :y
-
Just a thought....do the rears have wear indicators?
Not that I'm aware of, they should have seized and rusted up indicators though as that seems to happen first before they wear out!
-
Thanks for the replies :y