Noticed on Friday that there was quite a bit of condensation on the inside of the windows on the Omega.
Pulled the n/s/f carpet up and sure enough theres water swishing around in the footwell.
Inspection shows a little rust patch which water is seeping through, so it has now been took back to solid metal, which has left a 2p sized hole, which will be welded up tomorrow.
Then got underneath the front and spent a long time checking everywhere else around the front of the chassis for rust.
Found a couple of bits of flaky paint / underseal with a bit of surface rust underneath when it was scaraped off, but nothing to cause concern.
Clean those bits up and treated with Bilthambers finest. Will put some underseal or Supertrol over it tomorrow when its dried.
Also noticed a bit of play in the n/s/f bottom ball joint, so will change that along with the discs / pads before the MOT in 3 weeks time.