Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[twiglet]

Do the 3.0 and 3.2 run the same DMF?

Is the clutch slave cylinder internal or external, or are there 2 variants?

Cheers 

[05omegav6]

Do the 3.0 and 3.2 run the same DMF?

Is the clutch slave cylinder internal or external, or are there 2 variants?

Cheers 

Slave cylinder is internal, pushing the bearing directly onto the pressure plate springs

[twiglet]

Do the 3.0 and 3.2 run the same DMF?

Is the clutch slave cylinder internal or external, or are there 2 variants?

Cheers 

Slave cylinder is internal, pushing the bearing directly onto the pressure plate springs

Cheers Al 

Do you know if the 3.0 and 3.2 use the same DMF? I wondered if plod did something different with the 3.2's 

[05omegav6]

Standard DMF iirc, it all disintergrates the same if the release bearing fails

Pattern ones are a bit less substantial, but if you need one, buy genuine as they're half the price of LUK ones

[serek]

dmf clutch and slave its same on 3.0 and 3.2

[philhoward]

Any knows downsides from going for a solid flywheel and sprung clutch plate?  Apart from the flywheel being €329: http://www.mathijssentechnics.nl/?View=page&part_id=185014&hid=&lhid=&lvid=&mid=92 unless anyone knows of a cheaper one, of course!

[twiglet]

Cheers guys 

I was asking on behalf of my mate who manufactures flywheels here in the UK. 

Take a look here, they do some mighty fine work...

http://ttvracing.com/