Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[RobG]

Them as in pass. light & underlight trim? Yep, can`t see it being a problem

[fudy]

Them as in pass. light & underlight trim? Yep, can`t see it being a problem

pm sent

[fudy]

Them as in pass. light & underlight trim? Yep, can`t see it being a problem

pm sent

have you still got the headlight m8?

[RobG]

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

[fudy]

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day 

[fudy]

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day 

[RobG]

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day 

Sent a PM yesterday

[fudy]

Yes mate. Was going to ring but been busy stripping head for another member. Headlight incl. all bulbs, ballast and level motor and trim under £60 posted

sounds good to me m8 could you get it to me before the weekend though. my brothers tolerance is running out! Im borrowing his car every day 

Sent a PM yesterday

sorry m8 picked one up today, i never noticed the pm   ended up costing me £68 as well

[markomega25]

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

[RobG]

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

No compound. To fit it, reverse this, courtesy of Wellung666
It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

[Welung666]

I'm in a similar position to Fudy - need a drivers front wing for my Xreg facelift aster it had an argument with a post on Christmas Day - mines dark blue so guess its the Nocturno colour as well.

Interesting to hear that a pre face lift wing would fit/be the same. I found this place doing wings & paint service too:-

http://www.everycarpart.co.uk/

but they told me they only do pre-facelift wings. Will go back and ask them for a pre facelift but in my facelift colour and see if they can do that.

How easy is it to fit a wing? I know it's bolt on so hopefullly straight forward but do I need any sealing compound or such or is it a straight swap? Any tips on doing this welcome.

No compound. To fit it, reverse this, courtesy of Wellung666
It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off

I just scanned through that and thought to myself "that looks familiar", it was then I re-read it and noticed you'd copied it from me It's been a long day!

[markomega25]

Thanks RobG and Wellung666.

The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.

[RobG]

Thanks RobG and Wellung666.

The company have come back and said they can do that for me, £54 for the wing and £60 to paint it and £5.99 carriage. Bit pricey I guess compared to getting a second hand one and painting it myself, but I'm useless with spray can.

Better to pay someone who can (excuse the pun)