Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: DrAndyB on 17 November 2017, 10:44:25
-
HI all,
Noticed spare key was a bit sluggish to respond, so I shall pop some new batteries in both of my keys (I have not replaced them yet and I have had the car from new :D :D)
Any tips / advice on how the key comes apart ? Its a MFL with the two buttons. I believe the battery is a CR2032 ? Is it one in each key ?
Thanks in advance.
Andy.
-
Yes, its a 2032. The fob bit clips to the blade & then splits into 2.
Don't lose the chip.
-
https://m.youtube.com/watch?v=2MFfajQD5Wc
Seek & you'll find ..... ::)
-
https://m.youtube.com/watch?v=2MFfajQD5Wc
Seek & you'll find ..... ::)
:y :y :y
Thanks.
I cant play Youtube on Work Laptop ! (spoilsports ;D), so will have to wait till get home :y
Cheers.
-
https://m.youtube.com/watch?v=2MFfajQD5Wc
Seek & you'll find ..... ::)
:y :y :yt
Thanks.
I cant play Youtube on Work Laptop ! (spoilsports ;D), so will have to wait till get home :y
Cheers.
All straight forward, but as above, don't lose the chip out of the blade bit. Mostly they're a push fit, but some will fall out.
-
If batt is out for to long, you need to resync, which is explained in glovebox manual :)
-
If batt is out for to long, you need to resync, which is explained in glovebox manual :)
:y