Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Varche on 27 February 2012, 22:52:00
-
I can't tell from my bag of bits which side washer jet has a nozzle missing.
I have the complete assembly . Looking down on it the pipe entry is below the body and the nozzles are facing upwards with the clip up and nozzle assembly is angled away on left and nearer on right. Drivers side UK RHD car?
Can anyone help me please? I should have labelled them as i took them off.
-
are you meaning the ones on the bottet?. if so they fit any side just reset the jets with a pin after.
-
Bonnet washer jets - different part numbers for drivers/passenger.
They do look same though ???
Or do you mean HID washer jets - these are deffo handed ;)
-
Bonnet washer jets can be used either side, just depends on how much faffing about you want to do with pipe and connections, the heads are identical and as has been said, just adjust nozzles to suit.
-
Sorry meant headlight washers
-
Well in that case....... I have no idea :D as mine are missing :'( (hint hint anyone) ;)
-
looking directly at jet as your face is were headlight would be - water pipe faces right - leftside if water pipe left -right side :y hope this helps
-
This is a picture of the jet for the left hand (near side) headlamp washer jet, so I'm after the opposite to this.
(http://i1248.photobucket.com/albums/hh493/rods57/Vauxhall%20Omega%20Pictures/lh_headlight_jet.jpg)
-
For reference the Vauxhall part numbers for the Headlamp Jets are:
Right Hand (RH): V0090509518
Left Hand (LH) : V0090509516
RH/LH as looking from the front of the car.
If you take the jet off and look at the back you will find a RH or LH stamped into the plastic above the manufacture date. There is also a number which looks like a part nmber but it is not the same as the "official" Vauxhall part number?