Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: simmy on 01 March 2012, 22:37:41
-
hi all
did the pedal test tonight counted 11 flashes then a apause followed by 1 pause then 11 pause then 12 dont know how to work this out in relation to codes any ideas
-
I didn't think the 2.2 could do a pedal test :-\
-
And the pedal test doesn't go one louder either. Bit early for April fools me fingks. ;) ;D
-
Hi, Can you tell me how to do the pedal test?
-
seek and you will find :y
http://www.omegaowners.com/forum/index.php?topic=90581.0
-
seek and you will find :y
http://www.omegaowners.com/forum/index.php?topic=90581.0
Ooops! Sorry, I should look harder... Many thanks fiend61...
Just fixing up the Omega for it's MOT to get it back on the road... (1st time in 3 years!)
Much work to do and I want to run the P/C test just to see if anything's wrong with the old girl....
Thanks again....
-
TURNS OUT WAS A FAULTY AIR FLOW SENSOR GOT RAC TO DO DIAGNOSTIC..SO FINGERS CROSSED GARGE REPLACING PICK IT BACK UP TOMORROW
-
Replace it yourself.5 minute job.Only tool needed is a screwdriver. :y
-
TURNS OUT WAS A FAULTY AIR FLOW SENSOR GOT RAC TO DO DIAGNOSTIC..SO FINGERS CROSSED GARGE REPLACING PICK IT BACK UP TOMORROW
no need to shout :y :y :y :y
-
the RAC work sometime not always :y :y :y :y
-
maf code is 0100
10 flashes = zero
So that code would read 10 flashes 1 flash 10 10 any more than 10 is a miss count. Continuous flashing means no codes.
-
maf code is 0100
10 flashes = zero
So that code would read 10 flashes 1 flash 10 10 any more than 10 is a miss count. Continuous flashing means no codes.
Although having said that, the 2.2 pedal trick doesn't work apparently, so there's no reason the rules would be the same I guess.
-
Afaik it will work on some 2.2,s but not on all of them.