Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: dieseld4 on 06 March 2012, 21:21:28

Title: Petrol to diesel conversion..
Post by: dieseld4 on 06 March 2012, 21:21:28

Hi I have just put a 2.5td into a 3L omega, I done all my wiring at the plugs beside the battery (x2 and x3)
At first I couldn't get her to start and I had to bring power to the solenoid on the injector pump and she started no problem. can anyone tell why the solenoid is not opening? I believe I have all the wiring done correctly. There is power going to the ecu but the ecu is not sending power to the solenoid, Could this be a immobiliser problem?

Title: Re: Petrol to diesel conversion..
Post by: freecall666 on 06 March 2012, 22:16:29

have you changed the ecu-alarm- imob and all from a donner car?

Title: Re: Petrol to diesel conversion..
Post by: dieseld4 on 06 March 2012, 22:30:44

I have changed the ecu, transponder and chip. Would i need to change the alarm..??

Title: Re: Petrol to diesel conversion..
Post by: freecall666 on 06 March 2012, 23:31:38

if i remember right yes they are linked to each other. or if you have a tec2 you can program the one you have if you have the donnor carpass and your carpass.

Title: Re: Petrol to diesel conversion..
Post by: Kevin Wood on 07 March 2012, 12:01:09

Nope. Alarm is completely separate from the immobiliser. :y