Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Simon23 on 08 March 2012, 18:39:07
-
Odd question but does anyone know the EXTERNAL diameter of the pipes going to the centre sections on a 95 v6?
-
50.8 rings a bell, but be aware not all manufacturers stick to standard sizes. It's not uncommon for one makers back box not to fit on another's mid sections.
Although on re reading, your q would appear to relate to the cats..?
-
50.8 rings a bell, but be aware not all manufacturers stick to standard sizes. It's not uncommon for one makers back box not to fit on another's mid sections.
Although on re reading, your q would appear to relate to the cats..?
I am removing the centre boxes so I need a pipe to go over them. My cars too low to crawl under with some verniers so I thought i'd ask here. Only way to find out for sure I guess is to get in on a ramp.
-
4-pot o/d is a shade under 51mm so should imagine V6 would be about the same
-
50.8 - don't you mean 2 inches ?
-
Good job I managed to check. 58mm
-
Sorry for jumping on your thread Simon... I'm not technical in any sense, so bear with me, lol. Doesn't removing the centre boxes cause issues with back pressure?? Or have I got that arse about face? :-\
-
Sorry for jumping on your thread Simon... I'm not technical in any sense, so bear with me, lol. Doesn't removing the centre boxes cause issues with back pressure?? Or have I got that arse about face? :-\
Allegedly, But I've done it in a few cars. As long as you keep the backbox I've never had a problem tbh.