Omega Owners Forum

Chat Area => General Car Chat => Topic started by: buttsy19 on 16 March 2012, 10:48:02

Title: MOT failed
Post by: buttsy19 on 16 March 2012, 10:48:02
Took the mig in for her annual test today and she failed, but heres the rub it failed on a part i had correctly diagnosed as being faulty.

I bought the car as spares or repair a few months back and have spent this time getting her ready for the mot, new air meter sorted the eml and new cam sensor sorted the poor starting, replaced all the brake pads, new handbrake shoes and cable, full service new rocker cover gasket wheel alignment and on tuesday of this week i correctly diagnosed a worn out steering idler, part was ordered and fitted and after 100 miles took her in for her mot and it failed on the bloody steering idler massive amounts of play on the idler, rather cheap aftermarket parts although at £29.50 and £6.00 postage it's not so cheap.

Have emailed the company i bought it from and asked for a full refund so now i need a new idler this time genuine vauxhall, lesson learned i suppose. Appart from this no advisorys. Now have 14 days to get the work done and a free partial retest.
 
Title: Re: MOT failed
Post by: jonny2112 on 16 March 2012, 10:52:08
When I did the idler on my MFL I used an aftermarket part and thankfully at that time had no issues. Vx will be expensive I think  :-X
Title: Re: MOT failed
Post by: buttsy19 on 16 March 2012, 10:58:49
Must have been poor quality, as i have stated from fitting the new part to taking the car for an MOT i have litteraly covered 100 miles, not unless there is something on the suspension side that is causing the steering idler to fail, but surely not this quick.
Title: Re: MOT failed
Post by: RobG on 16 March 2012, 11:06:01
http://www.ebay.co.uk/itm/Vauxhall-Steering-Idler-Arm-110mm-9195731-Omega-Carlton-/190607397522?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D170642074659%252B170642074659%26po%3D%26ps%3D63%26clkid%3D7039906357539146608
http://allgermanparts.co.uk/ourshop/prod_1220825-Steering-idler-arm-Original-equipment-Lemforder-14927-01-9195731.html
Title: Re: MOT failed
Post by: Gaffers on 16 March 2012, 11:12:24
When I did mine in Germany I used Vx parts, yes the price will make you wince a little  :-X
Title: Re: MOT failed
Post by: Dr_X on 16 March 2012, 11:14:20
Got to say the lemforder stuff is good......with my drive and the roads around here it lasts twice as long as other aftermarket stuff.
Title: Re: MOT failed
Post by: albitz on 16 March 2012, 13:16:49
Mine failed MOT on steering idler the day after a new (from ebay) idler was fitted.Got my money back from the seller and fitted the idler from the breaker I ha stood on the drive (75,000 miles).Its still on there now and doing a fine job.Nom more cheap ebay idlers for me.
Title: Re: MOT failed
Post by: buttsy19 on 16 March 2012, 14:03:36
Thanks for the reply's, i have ordered a geunine Lemforder part.
http://www.ebay.co.uk/itm/170738496863?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Hope this does the trick and i have received a reply from the last seller saying that he will issue a full refund once i have sent it back to him, so all's well, part should arive tomorrow and will retest on mondoy.
Title: Re: MOT failed
Post by: big mel on 16 March 2012, 16:58:00
 hope it passes.
Title: Re: MOT failed
Post by: jonny2112 on 16 March 2012, 17:53:32
Yeah, good luck  :y
Title: Re: MOT failed
Post by: PhilRich on 16 March 2012, 18:55:07
Sorry to hear you've had so much chew with it, but hopefully it will go straight through with the Lemforder :y
Title: Re: MOT failed
Post by: buttsy19 on 19 March 2012, 10:03:52
Just an update,
Lemforder idler fitted at work yesterday, and took her for the retest this morning, passed with flying colours.

This is the third mig i have owned, with my previous 2 being 2.5s, and i must say the 2.2 has been a joy to work on, plenty of space under the bonnet parts easily accesible and in plentifull supply, is it therefore any wonder that those of us who own omega's just love them to bits.

Heres to another year of happy motoring.
Title: Re: MOT failed
Post by: Marks DTM Calib on 19 March 2012, 10:07:23
Yep, the pattern idlers are very poor and often dont even fit correctly, the Lemforders though are fine  :y
Title: Re: MOT failed
Post by: The Red Baron on 19 March 2012, 10:09:03
good result.  :y