Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: ngrainqey on 24 March 2012, 19:12:43
-
hello, dont know if one of the mods will want to move this to matchless' thread but regarding the starter inhibitor and reverse lights....
to save messing with the loom you can get a spare selector switch (just the connector and about two inch or so of wire from each pin is required)
then wire it up as:
Pin F and D for reverse light switch
then Pins B,G and D (will need a short piece of wire about two inch for this to connect to D aswell
Pin E and H
which makes the car think its in neutral
*Note* I cant be bothered with cruise control lol!
and if i want to go back to auto then just plug only selector switch in on autobox!
thanks
alex