Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: lee4206 on 05 April 2012, 20:24:57
-
As above I need 2 connectors and about 6" or more of wiring for the front fog lights on a facelift mv6(dont know if they're different).
Thanks
Lee
-
Just that or do you need the loom
(http://i190.photobucket.com/albums/z257/belisensis/FogLoom.jpg)
-
Hi Rob. The connectors on that loom are different to the ones on my car.
The reason I need them is ones broken and it looks like a poor repair has been done before. Could the plugs on mine be non standard? Or are there different looms.
Lee
-
The loom in pic is off a facelift MV6. Prodrive front bumper has the same fogs fitted as the rest of the range, can`t understand why yours are different :-\
-
Your fogs like these Lee?
(http://i190.photobucket.com/albums/z257/belisensis/FOGS.jpg)
-
Um I think so. I haven't removed them so can't say for sure bit the lens looks the same.
This is the bulb and connector I have on mine.
(http://i254.photobucket.com/albums/hh92/lee4206/IMAG0398.jpg)
Lee
-
Um I think so. I haven't removed them so can't say for sure bit the lens looks the same.
This is the bulb and connector I have on mine.
(http://i254.photobucket.com/albums/hh92/lee4206/IMAG0398.jpg)
Lee
Exactly the same bulbholder as on the ones in my pic, and the pic of the loom was paired to those fogs
-
Well as you can see the connectors are different but if the loom you have fits the hb4 bulbs then it should do. How much you after for it?
-
Well as you can see the connectors are different but if the loom you have fits the hb4 bulbs then it should do. How much you after for it?
Tenner posted
-
Sounds ok. I've also asked about some bits from the elite your braking. can you send me a all in price and your paypal details.