Omega Owners Forum
Chat Area => General Car Chat => Topic started by: ali omega on 16 April 2012, 10:48:46
-
Hi every one
sorry but i cant fine a good answer for my problem . so i ask it again
My car is Opel Omega B MV6 3.0 . saloon
i dont know what is version of my ecu . but the other experience to upgarde to v9 seems good.
i find someone has Equipment to upgrade the ecu . but he didt have "v9" . so i decide to find it and give it to him to upgrade my ecu .
but i didnt find .
so this is my problem !
where can i download the V9 to upgrade my ecu
thnx every one
-
no body have any idea? :o
any experince?
-
no body have any idea? :o
any experince?
-
There's only one way to get the updates done - and that's by someone with a genuine, current and up to date Vauxhall/Opel TECH2 (hardware and software subscription)
I'm guessing in Iran that would mean a main dealer - assuming they have an up to date subscription (if they don't then it's entirely possibly the TECH2 will say "no updates available").
-
There's only one way to get the updates done - and that's by someone with a genuine, current and up to date Vauxhall/Opel TECH2 (hardware and software subscription)
I'm guessing in Iran that would mean a main dealer - assuming they have an up to date subscription (if they don't then it's entirely possibly the TECH2 will say "no updates available").
Or you could by a second hand ECU with the update already on it ;)
-
Also bear in mind that the latest version available depends on the car configuration. It's not true to say that V9 is the latest available for all cars. Can't remember what is latest on a 3.0 off the top of my head, though. :-\
As said, the firmware is only available via a fully updated TIS subscription and a Tech2. This will offer any upgrades possible for the car's configuration if a check is made, so it could be that yours is already at the latest version?
-
i found main dealer that has TECH2
but i ask him , he said have V9 !!
is it possible?
he told me to find V9 and he do upgrade for me .
where can i found ECU V9 second hand?
-
i found main dealer that has TECH2
but i ask him , he said have V9 !!
is it possible?
he told me to find V9 and he do upgrade for me .
where can i found ECU V9 second hand?
He gets the software from Tis2Web or GlobalTIS. He will need the subscription.
-
Hi every one
this is my Ecu Id :
ECU ID= PS 90457098 261203272 1267358445 4
can u tell me what is that version ?
do i need to upgrade it?
-
Hi every one
this is my Ecu Id :
ECU ID= PS 90457098 261203272 1267358445 4
can u tell me what is that version ?
do i need to upgrade it?
The only way to tell what version is via Tech2, SW Ver.
-
Worth posting up TCM type (eg, GS820, GS821, GS8211) and current SW Ver, and we can tell you what latest is.
If you car is older than 1998, it cannot be upgraded.