Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: MaxV6 on 17 April 2012, 17:28:20
-
is it possible to take the mechanics (and maybe frame?) of a set of FL elite seats , and hybridize them with a set of FL Mv6 electric seats ?
to get the memory function, and so on?? but keep the lateral support and pull out leg support...
i'm guessing it would involve a fair bit of fiddly assed work, just wondering if anyone's done it ....
(i'm guessing there's some loom and an extra ECU somewhere to be dealt with as well..... )
about to fit an auto dipping mirror , thus the pondering....
-
It can be done & has been, not with FL but with Mini-facelift seats. sassanach did it :y
-
It has been done, but involves some welding. If electric back is not required, I understand its easier.
You'd need to use MV6 seats from a FL. The base mech could probably come from anything.
-
It has been done, but involves some welding. If electric back is not required, I understand its easier.
You'd need to use MV6 seats from a FL. The base mech could probably come from anything.
Think the OP was intending to use his own seats (F/L MV6) ;)
-
Elite seats don't go as low as mv6 seats, due to all the gubbins undernieth. So either loose some head room, or find a way to re jig the motors so the seat goes lower to match mv6 seat hight.
(personally I find mv6 side bolsters on the base uncomfortable. So was wondering If mv6 seat back would fit elite base with all the gubbins... But only if I really did have nothing better to do. :-\ )