Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: stuk50 on 18 April 2012, 21:43:14
-
Hi,
My first post here!
I have a 51 plate Omega Elite.
Over the past few weeks the EML light has been on. Computer says it is the Cats.
Have changed those. No change.
Changed cat sensors - no change.
Changed mass airflow sensor - no change.
Car seems to run absolutely fine - no problems at all with EML on.
Concern of course is if I get a real problem - how will I know?
I have come to the conclusion that it could be an electrical fault - but where?
I am not a mechanic of any sort but would appreciate some (helpful) advice.
I am not looking for - take the bulb out or get rid of the car!
Thanks :(
-
Assuming its a facelift V6 ...
Pedal trick and post up the results
http://www.omegaowners.com/forum/index.php?topic=90581.0
-
What engine?
-
Welcome to OOF mate :y
Would help if you confirm model, engine & year mate ;)
-
Welcome to OOF mate :y
Would help if you confirm model, engine & year mate ;)
And also where abouts you are, they may be a member close to you ;)
-
Hi,
Thanks for responses.
It is a Omega Elite Automatic petrol 3.2
Year is 2001 and I am in Fareham, Hants.
-
Hi,
Thanks for responses.
It is a Omega Elite Automatic petrol 3.2
Year is 2001 and I am in Fareham, Hants.
As said, pedal trick and post the codes on here
http://www.omegaowners.com/forum/index.php?topic=90581.0
-
Bet you get an 0430 code error....
-
Hi,
Thanks.
I get -
10 4 2 10
10 4 3 10
Cheers
-
0420/0430
Afraid you wasted your money changing the cats mate. Have a read of this http://www.omegaowners.com/forum/index.php?topic=90613.0
-
Hope you kept the old cats, pattern ones are nasty :(
-
Hi,
Thanks for your response.
Guess I am not having a good day Tunnie! - Didn't keep the old cats!
Now need to find a man to try your (RobG) suggestion.
I will let you know what happens,
Many Thanks.
-
Hi,
Thanks for your response.
Guess I am not having a good day Tunnie! - Didn't keep the old cats!
Now need to find a man to try your (RobG) suggestion.
I will let you know what happens,
Many Thanks.
Hope you didn`t throw them, worth around £70 each scrap
-
Hi,
Told you it was a bad day they are gone! :-[ :'(
-
Hi,
Told you it was a bad day they are gone! :-[ :'(
Hi ya mate iv a code reader near to you if you want in in Eastleigh shame about the cats but we live and learn if you want any help with turning your eml turned off/codes read
-
Hi,
Thanks for offer and sympathy.
I have a guy near to me in Fareham that can reset for me.
Cheers
:y
-
Hi,
Thanks for your response.
Guess I am not having a good day Tunnie! - Didn't keep the old cats!
Now need to find a man to try your (RobG) suggestion.
I will let you know what happens,
Many Thanks.
Hope you didn`t throw them, worth around £70 each scrap
Didn't think the 2.6/3.2 ones were worth anywhere near as much as the earlier V6 ones?
-
stuk50 - those cat efficiency codes (0420 and 0430) happen when the starting cats start to fail, common on 3.2.
The 3.2 (and 2.6) has 4 cats, and 4 O2 sensors, 2 each per bank:
Engine --- Sensor1 --- Start Cat (Precat) --- Sensor2 --- Main Cat --- exhaust
The solution is to move the 2nd sensor (on each bank) back behind the Main Cat:
Engine --- Sensor1 --- Start Cat --- Main Cat --- Sensor2 --- exhaust
About £15 for the required plugs and bosses, and find someone who can weld.
-
Please help. 1999 2 litre manual 16v. Recently changed cam sensor to cure stalling, though no EML light on. Yesterday did test run, all OK. Last night put car in garage, EML light on. Checked codes with paper clip, says 10 10 10 10 34 10 10 10 10 34. Simtech list does not list 34. Any ideas?
Terry Paget
-
Please help. 1999 2 litre manual 16v. Recently changed cam sensor to cure stalling, though no EML light on. Yesterday did test run, all OK. Last night put car in garage, EML light on. Checked codes with paper clip, says 10 10 10 10 34 10 10 10 10 34. Simtech list does not list 34. Any ideas?
Terry Paget
0340?
-
Please help. 1999 2 litre manual 16v. Recently changed cam sensor to cure stalling, though no EML light on. Yesterday did test run, all OK. Last night put car in garage, EML light on. Checked codes with paper clip, says 10 10 10 10 34 10 10 10 10 34. Simtech list does not list 34. Any ideas?
Terry Paget
You`re still getting cam sensor fault (0340) did you use a genuine one from VX