Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: snipe on 21 April 2012, 17:41:55
-
Hi fellow membe
eml light came on no rev counter working engine sounds ok ie no misfire .Turbo seems not to be working .Arrived home , car stood for one hour re started everything seems now to be ok.eml light out .Car is 51reg 2.2Dti speedo 96000,
-
You need the codes reading that are stored :y
-
Crankshaft sensor
-
You need the codes reading that are stored :y
x1 :y
-
You need the codes reading that are stored :y
x1 :y
Divided by one and minus the original!
Crankshaft sensor
+1.
-
Hi all
codes showing are P1590 P1335 P0725 garage states cran sensor . Car is 51 2.2Dti .Codes have been cleared . Will this be the end of it?.Members thoughts and experiences would be appreciated . Location plymouth . Are there any good contacts in this area.Thanks in anticipation.
-
if crankshaft sensor hasnt been replaced then no,use a genuine part tho :y
-
Hi Martin
Thanks for the info EML back on again .Can you advise me of approxs cost of part and fitting .Wouldyou advise main dealer.Thanks once again.
-
main dealer for part,no idea on costs either
-
Hi Martin
Main dealer £146.00.fitted inc vat. Sounds reasonable.In your opinion will it cure the problem.
Thasnks once again.
-
As far as I can work out the part is around £35...
http://www.vauxhallworldparts.com/vauxhall.php?partnumber=90540188
...very easy to fit, I'd charge a regular customer around £20-£30
The sensor is bolted into the engine block, just below the oil filter housing, may be easier to access from under the vehicle with engine tray removed.