Omega Owners Forum
Chat Area => General Car Chat => Topic started by: jonathanh on 05 May 2012, 15:02:21
-
Anyone know what the current TC price is for these?
-
Pads..........9192124 £26.35 £22.40 £15.00
Sensors.........90495144 £10.60 £9.55 £8.00
-
Many thanks much appreciated! I'll pm andyc
Apologies to the admins if this was in the wrong place
-
i brought front pads and a wear sensor last week from my local stealers....it come to less than £ 30....but it started at £ 50 when i rang ton ask if in stock.... :y
-
The pads are quite heavy, not sure if that will make postage expensive. Sure andyc will happily tell you :y
-
The pads are quite heavy, not sure if that will make postage expensive. Sure andyc will happily tell you :y
Postage on the last set of fronts & rears I got from Andy was a fiver, IIRC :y
-
Hi guys, my pad warning came on again today..... are the sensors only on the front pads????
that part number thrat rob quoted is presumably what i need... and both sides need doing?
cheers chaps :y
-
Hi guys, my pad warning came on again today..... are the sensors only on the front pads????
that part number thrat rob quoted is presumably what i need... and both sides need doing?
cheers chaps :y
Yep. You`ve probably got sensors on both fronts being early F/L. If fitting new, just fit to one side and bridge the terminals of the other connector with a bent paperclip or similar and tape up
-
Hi guys, my pad warning came on again today..... are the sensors only on the front pads????
that part number thrat rob quoted is presumably what i need... and both sides need doing?
cheers chaps :y
Yep. You`ve probably got sensors on both fronts being early F/L. If fitting new, just fit to one side and bridge the terminals of the other connector with a bent paperclip or similar and tape up
cheers rob.
is that cos the £8 TC cost you quoted was for just one side and you only need one side cos the pads will be the same level on the other side? if that makes sense :y
-
Hi guys, my pad warning came on again today..... are the sensors only on the front pads????
that part number thrat rob quoted is presumably what i need... and both sides need doing?
cheers chaps :y
Yep. You`ve probably got sensors on both fronts being early F/L. If fitting new, just fit to one side and bridge the terminals of the other connector with a bent paperclip or similar and tape up
cheers rob.
is that cos the £8 TC cost you quoted was for just one side and you only need one side cos the pads will be the same level on the other side? if that makes sense :y
Just about sums it up Steve
-
Hi guys, my pad warning came on again today..... are the sensors only on the front pads????
that part number thrat rob quoted is presumably what i need... and both sides need doing?
cheers chaps :y
Yep. You`ve probably got sensors on both fronts being early F/L. If fitting new, just fit to one side and bridge the terminals of the other connector with a bent paperclip or similar and tape up
cheers rob.
is that cos the £8 TC cost you quoted was for just one side and you only need one side cos the pads will be the same level on the other side? if that makes sense :y
Just about sums it up Steve
Cheers Roberto Di Broteo :y :y :y :y