Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: gibby on 05 May 2012, 17:36:42
-
:-\ Please could someone help, my car misfires and stalls whenever trying to Accelerate the following codes come up:
Engine
P0141
P0340
P1700
P0700
P1405
P0036
P1500
P1550
Transmission
P0727
P1781
P1140
P0706
-
P0340 is the cam sensor ... i would clear the codes and see if they return .
When the cam sensor is faulty it throws up all kind of codes .
If cam sensor comes back replace with genuine VX only and see how you go from there :y
-
Here is the list of fault codes for your engine :y
http://www.omegaowners.com/forum/YaBB.pl?num=1197277610
-
I remember this car from about 6 months ago.I went and had a look/read the codes.It had a long list of codes then too.
Iirc new cam sensor was advised,and once fitted car ran ok ? :-\
Was sensor genuine or pattern ?
-
P0340 is the cam sensor ... i would clear the codes and see if they return .
When the cam sensor is faulty it throws up all kind of codes .
If cam sensor comes back replace with genuine VX only and see how you go from there :y
Hello Sir, thank you very much for your help. I will try to replace the cs sensor as soon as possible.
-
I remember this car from about 6 months ago.I went and had a look/read the codes.It had a long list of codes then too.
Iirc new cam sensor was advised,and once fitted car ran ok ? :-\
Was sensor genuine or pattern ?
Hello Sir, I really appreciate for the advice, at the moment I'm trying to find the genuine cs sensor to replace the old one and see how it performs. once again thanks