Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: stebaz48 on 05 June 2012, 06:31:09
-
just did gasket leaking oil in to spark plugs 4 quid of ebay
want to clean crank beather pipe but how the hell do you get it off
with out taking off the exhaust anyone got any ideas pics would help.
cheers steve :'(
-
have a look in the maintainance guides :y
-
get on top of engine and feel down the pipe should feel the bolt, think its a 10mil, change the rubber Oring when putting back together. (Make sure engine cold!!!)
-
expect that gasket to fail on you quick
-
expect that gasket to fail on you sooner than later
-
just did gasket leaking oil in to spark plugs 4 quid of ebay
want to clean crank beather pipe but how the hell do you get it off
with out taking off the exhaust anyone got any ideas pics would help.
cheers steve :'(
Search & you shall find!
http://www.omegaowners.com/forum/index.php?topic=90584.0 (http://www.omegaowners.com/forum/index.php?topic=90584.0)
Couple of points, clean breathers & fresh oil helps prevents pressure build up.
Cam cover gaskets need to be fitted correctly to work, you must use a torque wrench on the cover as its only 8Nm, which is nothing. Correct sealant must be used as per guides as well.
Pattern eBay parts are a lottery, most fail much quicker than pattern. Its been proven over the last 7 years of this forum, so you want to do everything you can to try and make that gasket last!
-
that link only shows you how to clean tottle body
its the crank beather pipe am after
as for ebay parts never had any bad ones as for vauxhall had loads of bad ones. :y
-
that link only shows you how to clean tottle body
its the crank beather pipe am after
as for ebay parts never had any bad ones as for vauxhall had loads of bad ones. :y
(http://images.omegaowners.com/images/guides/22_tb_breathers_clean/1_Cam_Cover_Breather.jpg)
(http://images.omegaowners.com/images/guides/22_tb_breathers_clean/2_Cam_Cover_Breather_Sump_End.jpg)
-
cheers for pics but mine gos in to a box then down cant get in because of exhaust.
mines a xreg if thats any help .the pics you send look like the old cavs had on and the astras
having had these in the past '
thanks anyway steve
-
my mate got that one just undo it at the top it wont get in the way :y :y
-
my mate got that one just undo it at the top it wont get in the way :y :y
he wants it off to drag cloth through it to clean, but that pic is a 2.2
-
ask derek 89 he just had to change the box :y :y
-
cheers for pics but mine gos in to a box then down cant get in because of exhaust.
mines a xreg if thats any help .the pics you send look like the old cavs had on and the astras
having had these in the past '
thanks anyway steve
just clipped on, just undo the clips with som pliers and pop off to the right, clean out with some paraffen and wash out with some warm or hot water and leave to dry.
-
Just to clarify,i didn't change the box,just cleaned it out.I did however have to change the hoses which were in a bad way.
I was unable to get the correct size hose so had to reluctantly buy a vx bend and cut it to fit.this cost me £10 for a £2 job
-
Just to clarify,i didn't change the box,just cleaned it out.I did however have to change the hoses which were in a bad way.
I was unable to get the correct size hose so had to reluctantly buy a vx bend and cut it to fit.this cost me £10 for a £2 job
should of got to motorfactors £3 for new one.