Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: cure2fast on 08 June 2012, 08:24:33

Title: How to turn off oil sensor?
Post by: cure2fast on 08 June 2012, 08:24:33

Hi guys. After changing my dead 2.5 TDI for my 3.0 V6, my repairer forgot to attached oil sensor. Now every time when I start the car it says :"Check oil level", and its very irritating. >:( How I can turn it off?

Title: Re: How to turn off oil sensor?
Post by: TheBoy on 08 June 2012, 09:36:10

you will need to ground the wire.  Although I would have expected every V6 to have an oil sensor in the sump  ???

Title: Re: How to turn off oil sensor?
Post by: cure2fast on 08 June 2012, 11:23:44

Sorry for bad expresion...not attached, but probably forgot to connect wires.

Title: Re: How to turn off oil sensor?
Post by: kcl on 08 June 2012, 12:49:40

Quote from: TheBoy on 08 June 2012, 09:36:10

you will need to ground the wire.  Although I would have expected every V6 to have an oil sensor in the sump  ???

Povetry spec ones with TID don't have the sensor  :y

Title: Re: How to turn off oil sensor?
Post by: cure2fast on 08 June 2012, 12:55:10

So how should I solve my problem? ???

Title: Re: How to turn off oil sensor?
Post by: dbug on 08 June 2012, 13:44:11

Quote from: cure2fast on 08 June 2012, 12:55:10

So how should I solve my problem? ???

See TBs post above (# 1) ;)

Title: Re: How to turn off oil sensor?
Post by: cure2fast on 08 June 2012, 14:01:39

Thaks guys!  ;)

Title: Re: How to turn off oil sensor?
Post by: cure2fast on 05 July 2012, 11:53:15

Hi again!  :) I was looking but I couldn't find out where I can find these wires? I try to find it somewhere on the internet, but found nothing...any help?  ???