Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: HockeyDave55 on 27 June 2012, 23:28:37
-
Hi chaps!
I have made a blank plate for the EGR port but dose anybody know of an EGR cheater board that will work on the 3.0xe?
I know of a board made for the 2.2 in the VX220 among others but they don't work on my engine, I just get an EML light come on.....
I am sure I found one but I can't now???? ::)
-
The Z22SE one should work but, the wiring is slightly different!
-
This is the one:
(http://images.z22se.co.uk/userpix/13_EGR_cheater_version_2_1.jpg)
where as the Z22SE one is:
(http://images.z22se.co.uk/userpix/13_EGR_cheater_1.jpg)
-
This is the one:
(http://images.z22se.co.uk/userpix/13_EGR_cheater_version_2_1.jpg)
where as the Z22SE one is:
(http://images.z22se.co.uk/userpix/13_EGR_cheater_1.jpg)
Yep! My bad!!!! I built the bottom one!!! Slapping my head now!!! Thanks Mark. :y
-
I'm guessing the relay can be a low current one???
-
Is this working?
I am currently getting rid of my EGR valve (it's moved aside currently, piping removed, holes on intake and exhaust blocked off).
-
Hi Guys,
I'm thinking that I may use a cheater to make sure I don't have any problems with the EGR as I am current;y having ongoing issues with vacuum and lumpy running as well as gearchange issues! Would I be able to buy one from anywhere as electrical circuits aren't my thing. Cheers
-
Hi Guys,
I'm thinking that I may use a cheater to make sure I don't have any problems with the EGR as I am current;y having ongoing issues with vacuum and lumpy running as well as gearchange issues! Would I be able to buy one from anywhere as electrical circuits aren't my thing. Cheers
It really is simple, take a look at the z22se forum and jump in with both feet! It does work... Well, I have no fault light on so it's all good! :y
-
sorry..wrong post