Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: carpediem82 on 21 July 2012, 16:08:22

Title: how many tubes should be there?
Post by: carpediem82 on 21 July 2012, 16:08:22: Hi!
I have a cd-changer in trunk, but i don't know how to connect with the radio.
1.I opened and i saw that 1 brown tube wasn't in place. On the back of the button is place for 5 tubes to be connected, i have just 4. Is ok or should i search for the fifth?
(http://img542.imageshack.us/img542/8708/s4300378.jpg) (http://imageshack.us/photo/my-images/542/s4300378.jpg/)

2.The problem with the cd-changer. It is a Philips. I can load the 6cd, but i don't think is connected with the cd-player. Cd-player is not the original, it is a Clarion. It is something what i can try?
(http://img825.imageshack.us/img825/7174/s4300382.jpg) (http://imageshack.us/photo/my-images/825/s4300382.jpg/)

and the back of cd-player:(http://img69.imageshack.us/img69/9109/s4300387.jpg) (http://imageshack.us/photo/my-images/69/s4300387.jpg/)

3.I found this wires what don't connect to anything. Can be from a previos alarm or something else?
(http://img534.imageshack.us/img534/4956/s4300384.jpg) (http://imageshack.us/photo/my-images/534/s4300384.jpg/)

Any sugestions?
Thank you for reading.
Title: Re: how many tubes should be there?
Post by: Andy H on 21 July 2012, 16:48:17: I can't quite make out which radio you have. It looks as though it says 'Clarion' on the front panel :-\

You need to get hold of the 'pin out' diagram for your exact model of radio. You also need to check the part number of your CD changer.
Title: Re: how many tubes should be there?
Post by: carpediem82 on 21 July 2012, 18:10:48: Is hard to find any information on the radio Clarion DRB4375R. The cd-changer is Philips dc022.

About the tube: is ok to be there just 4 tubes?
Title: Re: how many tubes should be there?
Post by: martin42 on 21 July 2012, 19:38:22: The cable on the left is for a cd changer,but you need to find the cable ,as this is an aftermarket headunit,it will need the right connector unit to operate a different make of cd changer.
Title: Re: how many tubes should be there?
Post by: freecall666 on 21 July 2012, 19:59:13: the brown tube is for heater control they can pop off some times if you pull on any wires in a loom it maybe near to on its line.
Title: Re: how many tubes should be there?
Post by: carpediem82 on 21 July 2012, 20:13:50: the brown tube was "pop". when i put back to place. On the back of the button i can put 5 tubes and i have4. I don't know if i should look for some other tube what can be loos or i have just 4.
Title: Re: how many tubes should be there?
Post by: freecall666 on 21 July 2012, 23:05:24: Quote from: carpediem82 on 21 July 2012, 20:13:50
the brown tube was "pop". when i put back to place. On the back of the button i can put 5 tubes and i have4. I don't know if i should look for some other tube what can be loos or i have just 4.
5th is empty it has a fatter end than the rest of them.
Title: Re: how many tubes should be there?
Post by: carpediem82 on 22 July 2012, 08:50:44: Thank you! Now i will put everything back :)