Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bob G on 21 July 2012, 16:36:44

Title: wishbone bushes
Post by: Bob G on 21 July 2012, 16:36:44

asked a few questions a while back and read both write ups on how to replace the bushes, one thing though they both seem to describe it with wishbones removed, sure I saw it done at Newent with wishbone still in place, is it possible?

Title: Re: wishbone bushes
Post by: RobG on 21 July 2012, 16:45:45

http://s696.photobucket.com/albums/vv327/Turkpix/?action=view&current=HowtofitFrontPoly-Bush-1.mp4

Title: Re: wishbone bushes
Post by: Jimbob on 21 July 2012, 17:22:47

Easy with wishbone in place....

just undo the one bolt your doing, there is enough room to cut out the old bush and slide in the new one :y

Title: Re: wishbone bushes
Post by: Seth on 21 July 2012, 17:35:26

Or see our Turk ((https://dl.dropbox.com/u/43954633/rofl.gif)) in action doin' 'em:

http://www.youtube.com/watch?v=D5Nfvr_CHQM&feature=channel&list=UL

 :y :y :y :y :y

Title: Re: wishbone bushes
Post by: feeutfo on 21 July 2012, 17:41:46

Quote from: Bob G on 21 July 2012, 16:36:44

asked a few questions a while back and read both write ups on how to replace the bushes, one thing though they both seem to describe it with wishbones removed, sure I saw it done at Newent with wishbone still in place, is it possible?

for fitting poly to the front bush only, yes.
For replacing either bush with another oe, no. As you need a press.