Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: dezzer3851 on 19 August 2012, 19:08:46
-
Dose anyone know if I can fit 5 stud vectra wheels to my omega
-
Yup they fit, but look wrong. Too small
-
Depends which ones and what tyres you intend to fit?
Eg an 18" vectra et38 with 245 and rim protection will foul the shock. And a 50 profile will foul the spring cup.
Should be fine in oe sizes though.
-
Thought that vectras run 16in
-
Thought that vectras run 16in
you can fit..
-
Thought that vectras run 16in
They run a lot of sizes, up to 19" in some cases.
-
Ok thank u
-
So I can fit 225\45\16 on mine then
-
So I can fit 225\45\16 on mine then
you can but 225 50 16 or 225 55 16 will be better imo
-
you can fit, but the offset is wrong.
Expect steering issues
-
you can fit, but the offset is wrong.
Expect steering issues
I think the 5 stud Vectra wheels from >02 should fit with no issues. Both seem to be 5x110 PCD 35 to 45 Offset 65.1 Bore.
http://www.alloywheels.com/Fitment_Guide/Vauxhall
-
that's a bit vague -is it 35 offset or 45 offset ?
10mm will make a very appreciable difference to your ground-level offset and therefore a big difference to the steering weight and feel.
-
Had both omega and vectra sport stars on mine. No issues what so ever, 8 mm difference in offset. So 16mm difference in wheel track.
If there was any issue to be had on those wheels, buggered if I could find it.
-
just as an aside - which have you got on now ?
and you've got steering issues, right......?
-
Here are Vectra 02's sitting on my Elite. Offset may be slightly out but tis hard to tell.
These are 17" with the 235/45/17 tyres on !
http://www.omegaowners.com/forum/index.php?topic=45520.0
-
Ran 16" Vectra Alloys on my Omega, no problem at all :y.
Dodgy old picture:
(http://i260.photobucket.com/albums/ii38/GrizzlyLiam/Cras/4e037518.jpg)