Omega Owners Forum
Chat Area => Omega Gallery => Topic started by: swordfish on 07 September 2012, 19:20:37
-
just thought i would let you know about these tail trim pipes i got for my omega. ;D they fit a nice tight fit over the standard tail pipes on my elite. and the outlet size is 3 inch [ so not to big] they come with clamps but you dont need the clamps as they are such a good fit [ need tapping on with a rubber hammer . they wont be coming off thats for sure :they are also slash cut and perferated so don't sound like a wet fart and fit the shape of the bumper good . best bit of all though is they are only 10 pounds each [ free delivery] hears the ebay number
320848545385 cheers carl :y :y :y
(http://i1248.photobucket.com/albums/hh486/yompalotuk/P1020865.jpg)
(http://i1248.photobucket.com/albums/hh486/yompalotuk/P1020864.jpg)
(http://i1248.photobucket.com/albums/hh486/yompalotuk/P1020863.jpg)
-
They look good quality , maybe fit a jublee clip around them to stop them being pinched ..... thanks for the link :y
-
http://www.ebay.co.uk/itm/320848545385;jsessionid=BFE3C9E2DFA118D2656EC39A29899F64?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_sacat%3D0%26_nkw%3D320848545385%26_rdc%3D1
-
Looks well :y
-
Look good, I'll be looking for some soon. Wondering what a stainless exhaust place would have for ones to be welded on :-\
-
They look good quality , maybe fit a jublee clip around them to stop them being pinched ..... thanks for the link :y
A 1/8" pop rivet might be an effective option ;)
-
:y cheers for that. I'm getting them :)
-
They look good quality , maybe fit a jublee clip around them to stop them being pinched ..... thanks for the link :y
A 1/8" pop rivet might be an effective option ;)
Aye :y I had some similar on the twin outlet v6 veccy , they butted up quite tightly in the center but still used the securing bolts the supplied :y
-
Looks great :y
-
Not any more they aint. :-\
just thought i would let you know about these tail trim pipes i got for my omega. ;D they fit a nice tight fit over the standard tail pipes on my elite. and the outlet size is 3 inch [ so not to big] they come with clamps but you dont need the clamps as they are such a good fit [ need tapping on with a rubber hammer . they wont be coming off thats for sure :they are also slash cut and perferated so don't sound like a wet fart and fit the shape of the bumper good . best bit of all though is they are only 10 pounds each [ free delivery] hears the ebay number
320848545385 cheers carl :y :y :y
-
Not any more they aint. :-\
just thought i would let you know about these tail trim pipes i got for my omega. ;D they fit a nice tight fit over the standard tail pipes on my elite. and the outlet size is 3 inch [ so not to big] they come with clamps but you dont need the clamps as they are such a good fit [ need tapping on with a rubber hammer . they wont be coming off thats for sure :they are also slash cut and perferated so don't sound like a wet fart and fit the shape of the bumper good . best bit of all though is they are only 10 pounds each [ free delivery] hears the ebay number
320848545385 cheers carl :y :y :y
:(
A mass influx of omega owner's wanting them ::) :-\
-
have they gone up or are they out of stock ???
-
have they gone up or are they out of stock ???
Nope, still listing loads on that auction?
Although that said, now couple of quid for delivery :y
-
Very nice, what is the diameter of your exhaust?
Mine is 60mm and the unit also is 60mm, did you have any difficulty in getting to fit?
-
yes they are a tight fit. you need to clean the pipes and scotch bright them and put a bit of grease on ,then tap them on with a rubber mallet
but make sure they are lined up correctly . :y
-
good enaf :P