Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Jusme on 16 September 2012, 18:03:10

Title: Dis Pack needed.
Post by: Jusme on 16 September 2012, 18:03:10
Need Dis Pack for 02. 3.2/2.6 ? Don't know if they are the same ?   :y
Title: Re: Dis Pack needed.
Post by: albitz on 16 September 2012, 18:07:21
2.6/3.2 are the same. Might help to state if you need 1/3/5 or 2/4/6 coil. It should say on it. :y
Title: Re: Dis Pack needed.
Post by: TheBoy on 16 September 2012, 19:25:44
iirc, it was 1/3/5.

Although I'd seeriously consider buying new, but they are pricey.
Title: Re: Dis Pack needed.
Post by: twiglet on 16 September 2012, 19:35:04
Think I've got a spare 1/3/5 somewhere.  :y
Title: Re: Dis Pack needed.
Post by: albitz on 16 September 2012, 21:03:00
Now theres a surprise. ::) ;D
Title: Re: Dis Pack needed.
Post by: Brikhead on 16 September 2012, 22:07:59
Either bank will do, if you are prepared to snip the loom...
Title: Re: Dis Pack needed.
Post by: feeutfo on 16 September 2012, 23:37:24
Either bank will do, if you are prepared to snip the loom...

Almost certain the two coil pack are angled, in that the boots don't extend down 90degrees vertically from the body, they are angled in slightly. Iirc...?

If so they are definately handed in construction, not just the loom plug, as the coil PAC won't seat correctly otherwise.

And btw, on an LPG car, I would only ever fit a new coil PAC. It may run fine on petrol, but more often than not they don't run on gas over 80/90k old. I had to replace one of my originals (246) at 70k, although water ingress from a leaky scuttle didn't help it at all.
Title: Re: Dis Pack needed.
Post by: Jusme on 20 September 2012, 16:37:12
Dis Pac arrived today thanks to Robsey, gonna give it a try, noting what you say Chris. Yes I would love to fit a new pac, and may well have to ? But after just shelling out £2,200 on the old girl, and £160,000 for new house, my wallet is squeeking... 'A LOT'.  :(