Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jabe on 25 September 2012, 22:55:04

Title: V6 Omega Tubular Manifolds [2012]
Post by: Jabe on 25 September 2012, 22:55:04

Hey!

I have been searching for ages for some "proper" information on tubular manifolds for the V6 omega but there clearly isn't any. The only bit of information that is constantly being repeated is that someone on autobahnstormers was making some (dating all the way back to 2008) and that is all.

Can anyone confirm a success story for the Omega? Most if not all Google searches end up on forums where people remove the omega engines and drop them into other cars which is really not useful.

If anyone could be kind enough to log into the ABS forum and dig out the most up to date information and post back, I would be ever so grateful!

Thanks! :)

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: albitz on 25 September 2012, 23:34:12

I seem to remember  Serek had some made a while back.

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: Jabe on 26 September 2012, 00:08:03

Quote from: Albitz on 25 September 2012, 23:34:12

I seem to remember  Serek had some made a while back.

Do tell  :P

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: albitz on 26 September 2012, 00:22:26

Cant remember details tbh (my memory is patchy at the best of times) just vaguely remember it from approx. a year ago.
Best to drop him a PM,although he sometimes doesnt log on for a few days,so you may need to be patient.

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: TheBoy on 26 September 2012, 20:38:22

Think MV6Man had a set made

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: Andy89 on 26 September 2012, 21:15:59

Is this what you are talking about?

(http://i259.photobucket.com/albums/hh301/Andygun89/DSCF2112.jpg)

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: feeutfo on 27 September 2012, 03:17:48

Ah, are those the ones that restrict steering movement, fouling the steering idler on full lock iirc... There is a thread on here somewhere.

Think they where made in Poland, but poor memory here too. :(

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: Sehen on 27 September 2012, 08:25:51

http://enem.se/images/Extraktor/Opel-V6.jpg

Something like these? Not for an auto tho :)

Title: Re: V6 Omega Tubular Manifolds [2012]
Post by: Andy89 on 27 September 2012, 16:37:38

That was my thread
They do not touch anything of the car unless you are pressing hard on the throttle while turning full left.
they are made in sweden by ENEM.

And as said not for auto.